Installation manual

Part No. T0249-01, Rev A
April, 2002
User Documentation Page 37 of 55
User Documentation
Introduction The Vanguard Applications Ware Basic Protocols Manual (Part Number T0106) is a
collection of manuals and covers all Applications Ware protocols. The following
specific manuals are pertinent to the Vanguard 7300:
• Vanguard Configuration Basics (Part Number T0113)
• Frame Relay (Part Number T0106-02)
• SNMP (Part Number T0106-04)
• TELNET (Part Number T0106-07)
• Point to Point (Part Number T0106-08)
• Command Line Interface (Part Number T0106-09)
• X.25 Configuration Basics (Part Number T0107)
• Configuration for APAD/ATPAD (Part Number T0110)
• Bandwidth Management (Part Number T0108)
IP and LAN Feature
Protocols
The IP and LAN Feature Protocols Manual (Part Number T0100) contains the
following pertinent manuals for the Vanguard 7300:
• Vanguard Router Basics (Part Number T0100-01)
• Bridging (Part Number T0100-02)
• IP Routing (Part Number T0100-03)
• OSPF (Part Number T0100-04)
• SoTCP (Part Number T0100-06)
• IPX (Part Number T0100-07)
• Quality of Service (Part Number T0100-10)
• Ethernet Basics (Part Number T0109)
• Asynchronous Transfer Mode (ATM) (Part Number T0100-11)
• 7300 T3 ATM (Part Number T0100-12)
• Border Gateway Protocol (BGP-4) (Part Number T0100-13)
SNA Feature
Protocols
The SNA Feature Protocols Manual (T0101) contains these pertinent manuals:
• SDLC (Part Number T0101-05)
• AS/400 Communication Server (Part Number T0101-07)
• BSC 3270-to-SNA Conversion (T0101-08)
• BSC 2780/3780-to-LU0 Conversion (T0101-09)