Installation manual

Part No. T0249-01, Rev A
April, 2002
TokenRingCardSupport Page 3 of 55
Token Ring Card Support
Introduction The new feature available for 6.0 Point Release 01B is briefly described below. This
section also lists where to find user documentation that contains detailed
explanations of this feature.
Documentation on
the Web
You can find a detailed description of the new Release 6.0 Point Release 01B feature
in the referenced document at the Vanguard Managed Solutions web site:
http://www.vanguardms.com/documentation
Release 6.0 Point
Release 01B
Feature
The Vanguard 7300 Series has been enhanced to include Token Ring Card Support.
This card provides two 4/16Mbps token ring ports for the 7300 platform. This card
conforms to the 802.5 standard for token ring. Each port is independently operated at
either 4/16Mbps. Either a UTP or STP cable can be connected to the appropriate
port. The cable type is automatically selected. A standard RJ45 connector is
provided for UTP and a standard DB9 connector is provided for STP cables.
Warning
Attaching CTP cable to UTP port damages token ring card. Make sure you attach the
CTP cable to the CTP port.
For more information, refer to the 7300 Installation Manual (Part Number T0185).