Installation manual

Part No. T0249-01, Rev A
April, 2002
Software Improvements Page 23 of 55
T1 Card LED Functionality
Configuration changes have been made to T1 ports. The T1 Card LED Functionality
has changed. (DRCaa22489)
Note
When the 5.4.POL is booted not configured, the T1 ports start flashing. You
must change the port to NULL to turn off the LED.
This is fixed.
T1 Card LED LED Description
On Indicates that the associated port is not an alarm.
Off Indicates that the associated port is not configured.
Flashing Indicates that the associated port is in alarm.