Installation manual

Part No. T0249-01, Rev A
April, 2002
Installing Software Images and Bootprom Software Updates Page 13 of 55
Send File To send a file, open the Procomm application. Under the Data Menu select
Send File.
Figure 5. Procomm Plus Terminal Send File
Send the correct file using one of the enclosed “c73 loaders” below:
c73cv115.xrc for 115 Kbps c73cv288.xrc for 28.8 Kbps
c73cv192.xrc for 19.2 Kbps c73cv384.xrc for 38.4 Kbps
c73cv576.xrc for 57.6 Kpbs c73cv96.xrc for 9.6 Kbps
Note
To reduce the download time, Vanguard Managed Solutions recommends
c73cv115.xrc for 115 Kbps.
7) Once the download is completed, change the terminal speed to the appropriate
coldloader speed chosen in step 4. Download the software images or
Bootprom.xrc files. The software images can be acquired from the directory:
\Vanguard\SFW_IMGS\73*0\R60P01*
The required Bootprom version (such as T10BP111.xrc) can be acquired from
the directory containing the same name:
\Vanguard\SFW_IMGS\73*0\COLDLOAD\T10BP1*
This button
also Sends
Files.