Installation manual

Part No. T0249-01, Rev A
April, 2002
Installing Software Images and Bootprom Software Updates Page 11 of 55
5) Download from the CD-ROM the appropriate coldloader. Example:
\Vanguard\SFW_IMGS\73*0\COLDLOAD\T10BP1**
Note
You must use the coldloader from the current bank column of the table
in step 4.
6) When using the Procomm application:
• Select Send File from the Procomm Data Menu
• Select RAW ASCII transfer mode
• Select 9600 for the Coldloader speed
The following figures show the Procomm application.
Note
To be sure you are in RAW ASCII transfer mode, when in Procomm, check the
setup file. Options->Data Options
Figure 3. Procomm Plus Terminal
RAW ASCII