Installation manual

2-78 Installation
Installing Software Options
Accessing Node Serial Number from Node Statistics
Access Serial
Number
Perform these steps to find the SAK serial number using the Node Statistics:
Step Action Result/Description
1 Access the CTP by entering the
following at the * prompt:
.ctp <CR>
You are prompted to enter the
password.
2 Enter the password. The default password is <CR>.
After you enter the password, the
Main menu appears.
3 From the Main menu, select
Status/Statistics.
4 Select Node Stat. The Node Statistics consists of
several screens. The 6500
PLUS
processor's serial number is on
the third screen, as shown in
Figure 2-25.
N
o
t
e
Multi-CPU card serial numbers
appear on subsequent screens.
5a)Take this serial number and if
the card is a:
6505
PLUS
, add a -1 (dash 1)
6507
PLUS
, add a -2 (dash 2)
6525
PLUS
, add a -3 (dash 3)
b) Give the serial number with
the dash number to the Van-
guardMS sales
representative.