Specifications

Application Views Supported Applications
Device Management Page 56 Motorola Vanguard
AddFiltAction
Determines whether the link will pass or block
frames with a MAC address that are not listed in
the MAC Address Filter Table. A setting of none
indicates no MAC address filtering will be
performed for this link.
PortFiltAction
Determines whether the link will pass or block
frames with a Protocol value that are not listed in
the Protocol Filter Table. A setting of none
indicates no MAC address filtering will be
performed for this link.
StpState
Determines whether to forward or block an STE
(or Single Route Broadcast) frame when Stp
Control is set to Man.
The following six buttons are located at the
bottom of the Bridge Configuration Information
view.
This button accesses a table providing traffic
statistics broken down by frame type for Local
Termination sessions—see Local Termination
Table View (Page 57).
This button accesses a table providing traffic
statistics broken down by frame type for Local
Termination sessions—see Filtering Information
View (Page 58).
This button accesses a table providing traffic
statistics broken down by frame type for Local
Termination sessions—see WAN Bridge Link Info
View (Page 59).
This button accesses a table providing traffic
statistics broken down by frame type for Local
Termination sessions—see Address Table
Parameters View (Page 60).
This button accesses a table providing traffic
statistics broken down by frame type for Local
Local Termination Config
MAC Address Filtering
WAN Bridge/Link Info
Permanent Address Table
802.1d Static Link Table