Specifications

Application Views Supported Applications
Device Management Page 33 Motorola Vanguard
SVC Addr
Network address for calls routed beyond this
node. A route selection entry is not needed for
calls destined within this node: PAD port or node
resource (for example, control port) calls. The wild
card (match anything) character is *, and can also
be part of the entry. When set to (blank), this
parameter is ignored.
Destn 1 through 8
The network address to which calls are routed.
Priority 1 through 8
The priority for call forwarding to ports within the
Route Selection Table. Call forwarding is
determined by a combination of priority and load
conditions. 0 is the backup port. Values 1-15 are
also valid, 1 being the highest priority, and 15 the
lowest.
LAN Connection Configuration Table
View
Access: From the Icon Subviews menu for the
MotWANApp Application icon, select LAN Configuration.
This view contains the Configuration parameters
for each LAN Connection. Column headings are
as follows:
ConnNo
A specific LAN Connection Record within the
table.
Forwarder
This parameter specifies the type of forwarders
communicating over this LAN Connection.
BridgeLnk
The Bridge-Link that is using this LAN
Connection.
RouterIf
The Router Interface that is using this LAN
Connection.
Table 11: Type of Forwarders
Forwarder Description
brid Bridging Forwarders.
rout Routing Forwarders.
brout Bridging and Routing Forwarders.
nc Skipped during configuration.
newvalBrid Same as ‘brid’.