Specifications

Application Views Supported Applications
Device Management Page 20 Motorola Vanguard
Time Reset
Time when node was restarted or statistics were
reset by a CTP/SNMP Manager command.
State
Current activity state of the channel. See Table 4
for expanded descriptions of possible states.
Table 4: Channel State Descriptions
State Description
dsp-down DSP is down.
idle DSP is ready to be assigned to a
connection.
negotiating Source has accepted the Call Request
and is waiting for a Call Accept from
the destination node.
data-passing Normal data passing state.
ap-clearing Call Clear request arrived from access
side.
np-clearing Call Clear request arrived from
network side.
clearing-call A call collision or a Call Clear along
with an X.25 reset or a “start buffer
discarding.”
flushing-on-clr Call has been cleared with FLUSH;
waiting for packets to flush from DC
Handler rings.
flushing-data Waiting for x.25 confirm.
flushing-dc-ring Waiting for the data on the DC Handler
ring to be flushed after an x.25 confirm
or stop discard.
clearing Call has been cleared.