Specifications

Application Views Supported Applications
Device Management Page 104 Motorola Vanguard
Protection
The level of data or connection protection
specified for calls to or from this port (the actual
level will be negotiated to the lesser of this level
and the level configured for the other end of the
call): none = no protection; cpOnly = connection
protection only; fullDcp = full data and
connection protection.
DCPTimeout
The number of seconds that DCP on the
originating side will wait between reconnection
attempts.
DCPRetry
The number of times that DCP on the originating
side will attempt to reconnect before clearing the
call.
Packet/Frame Statistics View
Access: In the X.25 Configuration Table, click the
Packet/Frame Statistics button.
This view contains a table that provides packet
and frame information for each of the device’s
X.25 ports. Column headings are as follows:
PortNo
Identifies a particular X.25 port.
InitFrame
Indicates the kind of frame (sabm or disc)
required by other end for link startup. If value is
none, the link is initiated by the other end.
FmNumbering
Indicates whether port uses normal (norm) or
extended (ext) frame-level sequence numbering.
FmWindow
The frame-level window size. (This must be set to
the same value in devices at each end of the link.)
PktNumbering
Indicates whether port uses normal (norm) or
extended (ext) packet-level sequence numbering.
PktWindow
The packet-level window size. (This must be set to
the same value in devices at each end of the link.)
PktSize
The maximum packet size in bytes. For proper
operation, the size must be the same in devices at
each end of the link.
MaxDataPkt
The maximum negotiated packet size allowed for
inbound and outbound calls on this X.25 link.