Technical information

Part No. T0289, Rev A
August, 2008
Boot Prom Software Updates Page 34 of 97
9) Choose the correct bootprom directory that includes the coldloaders.
The example below shows the 7300 Series Bootprom Directories.
\T10BP1** refers to:
T10BP110 T10BP150
T10BP111 T10BP151
T10BP130 T20BP200
T10BP140 T30BP300
Bootprom
Directory
ONS Image Compatibility Bootprom
Version
T10BP110 5.4.P08A
5.4.P08B
1.10
T10BP111 5.4.P08#
Note
The pound sign “#” represents a letter from C to Z.
1.11
T10BP130 5.4.P0LA, 5.4.P0KA, and 5.4.P0JA
Note
Bootprom version 1.30 is required to run the 5.4 Point Release L software.
The 1.30 version of the bootprom does not work with any earlier 5.4.P08*
software. If you have a new CPU card, use bootprom 1.40 or 1.50.
The asterisk “*” represents a letter from A to Z.
1.30 or
greater
T10BP140 5.4.P0LB
Warning
Bootprom version 1.40 or greater is required to run with the new CPU cards.
1.40 or
greater
T10BP150 6.0.R00A, 6.1.R000, 6.2.R000, 6.3.R00A, 6.4.R00A, 6.4.R10A 1.50
T10BP151 6.0.R00A, 6.1.R000, 6.2.R000, 6.3.R00A, 6.4.R00A, 6.4.R10A
Note
Bootprom 1.51 is the latest for the MCP750 CPU.
Do not use bootprom 2.00 on the MCP750 CPU.
1.51
T20BP200 6.4.R00A and 6.4.R10A
Note
The IBM750 CPU must use bootprom 2.00
2.00
T30BP300 6.5.R000 and 7.1.R00A
Note
Bootprom revision 3.00 supports IBM750 and MPC750 CPUs.
Note
Bootprom revision 3.00 is mandatory for Release 6.5.R000.
3.00