Installation manual

Part No. T0001-43, Rev B
February, 2003
Applications Ware Page 7 of 99
Memory Requirements for Vanguard Applications Ware Release 6.2.R000
Memory Changes
for Release
6.2.R000
In order to support the Vanguard Applications Ware Release 6.2.R000, some
Vanguard products require memory upgrades. The total memory required for each
product at release 6.2.R000 is listed in this table:
Note
The table above lists the memory that is shipped.
If you intend to use Release 6.2.R000 and your Vanguard unit does not have
sufficient memory, please contact your representative to order memory upgrades.
Note
The Vanguard 6425, 6430, 6450, 6520, 6560, 100, 200, 300, 305, 311, 311
PLUS
,
and 312
PLUS
are not supported at Release 6.2.R000 and do not require memory
upgrades.
Product Total Memory Required at Release 6.2.R000
Vanguard 320 8MB or 12 MB DRAM
Vanguard 340 16MB or 32MB DRAM 4M Flash
Vanguard 342 32MB
Vanguard 6435 16MB or 32MB DRAM
Vanguard 6455 32MB DRAM
Vanguard 7310, 7330
(Version 1 and 2)
32M Flash 128M DRAM
Product What to order for Memory Upgrade
If your Vanguard unit
currently has...
You must order...
Vanguard 320 4MB DRAM 4MB DRAM or 8MB DRAM
upgrade
Vanguard 340 16MB
Vanguard 342 32MB
Vanguard 6435 16MB
Vanguard 6455 32MB
Vanguard 7310, 7330
(Version 1 and 2)
32M Flash 128M DRAM