Installation manual

Part No. T0001-43, Rev B
February, 2003
Software Improvements Page 40 of 99
11780 DRFaa20961 6.0.sp1 6.0.T1TA When a STATUS message is
received, Telenetworks
software records the cause
code in NLCB context. The
next message to be received is
overwritten (corrupted) by
Telenetworks because the
recorded cause code is not
zero.
11782 DRFaa20925 6.0.T16C N/A Vanguard 340 node crashed
“FER FAULT: Program
Exception Encountered.”
11783 DRFaa20958 6.1.R000 N/A Vanguard 6400 BRI Dial on
demand does not work in an
French network.
11790 DRFaa20984 6.0.T19C 6.0.T19D Vanguard 7300 FRI stations are
not recovering without a station
boot.
11791 DRFaa20983 6.0.R00A N/A All Vanguards - when using route
control (none, <list> to block a
subnet) the router stops accepting
all routes.
11811 DRFaa21028 N/A N/A Vanguard Terminal does not
capture data correctly.
11826 DRFaa21080 5.6.T17A 5.6.T17C Vanguard 340
when using
H323, a bit should be
initialized as zero before
calling H323_RAS SendMsg.
11845 DRFaa21120 6.0.R00A N/A Vanguard 320 NAT Static Port
Binding. Port numbers over
35000 change.
11848 DRFaa21127 6.0.R00A N/A Vanguard 6455 Ethernet errors
running 10 FULL.
11854 DRFaa21150 6.0.S100 6.0.T1XA Vanguard 6400 detailed link
statistics not working properly.
11868 DRFaa21167 6.1.T02A 6.1.T02C Vanguard 7300 SoTCP fails with
Debug Alarm “IDCM invalid
packet type 1”.
Change
Request
(CR#)
Limitation
Number
Release Where
Problem Was
Reported
Interim Patch
Release
Replaced by
Release 6.2
Problem Description