Installation manual

Part No. T0001-43, Rev B
February, 2003
Boot Prom Software Updates Page 29 of 99
9) Choose the correct bootprom directory that includes the coldloaders.
The example below shows the 7300 Series Bootprom Directories.
\T10BP1** refers to:
•T10BP110
•T10BP111
• T10BP130
• T10BP140
• T10BP150
Note
The respective .xrc file is contained in the directory with the same name.
Example: T10BP140.xrc would be found in the T10BP140 directory. T10BP150.xrc
would be found in the T10BP150 directory.
Bootprom
Directory
ONS Image Compatibility Bootprom
Version
T10BP110 5.4.P08A
5.4.P08B
1.10
T10BP111 5.4.P08#
Note
The pound sign “#” represents a letter from C to Z.
1.11
T10BP130 5.4.P0LA, 5.4.P0KA, and 5.4.P0JA
Note
Bootprom version 1.30 is required to run the 5.4 Point
Release L software. The 1.30 version of the bootprom
does not work with any earlier 5.4.P08* software. If
you have a new CPU card, use bootprom 1.40 or
1.50.
The asterisk “*” represents a letter from A to Z.
1.30 or
greater
T10BP140 5.4.P0LB
Warning
Bootprom version 1.40 or greater is required to run
with the new CPU cards.
1.40 or
greater
T10BP150 6.0.R00A
6.1.R000
6.2.R000
1.50