Installation manual

Part No. T0001-43, Rev B
February, 2003
Vanguard Feature Comparison Chart Page 16 of 99
Vanguard Feature Comparison Chart
Below is the Vanguard Feature Comparison Chart:
Feature Vanguard 6560 Vanguard 6450/6455 Vanguard 7300
Dual T1 Network
Interface
Specification
Connectors: Dual RJ-45 (100 ohm)
Framing: SF and ESF
Line Coding: AMI, B8ZS, B7ZS
Timing Source: Int, Receive
T1 CSU: Optional Daughtercard
Connectors: Dual RJ-45 (100
ohm)
Framing: SF and ESF
Line Coding: AMI, B8ZS
Timing Source: Int, Receive
T1 CSU: Built In
Two card versions:
1. 12 port T1 or E1 (RJ-45 120
ohm)
2. 8 port T1 or E1 (RJ-45 120
ohm)
E1-75 ohm support Future
Node wide CLOCK control
Dual E1 Network
Interface
Specification
Connectors: Dual RJ-45 (120 ohm)
BNC Via Ext Cable
Framing: E1_CAS, E1_CAS_CRC,
E1_CAS_FEBE
Line Coding: HDB3, AMI
Timing Source: Int, Receive
Connectors: Dual RJ-45 (120
ohm) - Dual BNC (75 ohm)
Framing: E1_CAS,
E1_CAS_CRC, E1_CAS_FEBE
Line Coding: HDB3, AMI
Timing Source: Int, Receive
T1
Framing: SF & ESF
Line Coding: AMI, B8ZS
Timing Source: Int, Receive
T1 CSU: Built In
E1
Framing: E1_CAS,
E1_CAS_CRC,
E1_CAS_FEBE
Line Coding: HDB3, AMI
Channelized Data
Support
Protocols Supported: X.25, FR, TBOP,
PPP
Maximum Number of Channels: 30
Maximum Aggregated rate: 1.920
Mbps
Protocols Supported: X.25, FR,
TBOP, PPP
Maximum Number of Channels:
24 (T1)
Maximum Number of Channels:
31 (E1)
Maximum Aggregated rate: 1.984
Mbps
Protocols Supported: X.25,
FR, TBOP, PPP
Max Number of Channels
per
T1/E1 port: 24 (T1), 31
(E1)
Total No. of channels per
card:
(T1) 8*24=192, 12*24=288
(E1) 8*31=248, 12*31=372
Total No. of channels per
System:
(7310 T1) 192*4=768,
288*4=1152
(7310 E1) 248*4=992,
372*4=1488
(7330 T1) 192*7=1344,
288*7=2016
(7330 E1) 248*7=1736,
372*7=2604
Note: all numbers subject to pro-
cessing capabilities of the 7300.