Part No. T0001-43, Rev B February, 2003 Page 1 of 99 Vanguard Applications Ware Software Release Notice Release 6.2.R000 Overview Introduction This notice contains update information for Release 6.2.R000 of the operating software for these Vanguard platforms: • Vanguard 320 • Vanguard 340, 342 • Vanguard 6435, 6455 • Vanguard 7310, 7330 Release 6.2.R000 does not support the following: • Vanguard 100 (supported by Release 5.3M) • Vanguard 200 (supported by Release 5.
Part No. T0001-43, Rev B February, 2003 Page 2 of 99 Memory Requirements for Release 6.2.R000 The memory requirements have changed for some Vanguard products supported by Release 6.2.R000 For more information on the memory changes that affect your Vanguard unit, refer to “Memory Requirements for Vanguard Applications Ware Release 6.2.R000” section on page 7. SAKs Software Access Keys (SAKs) are not generally used with Release 5.2 and later products. Pre-Release 5.
Part No. T0001-43, Rev B February, 2003 Page 3 of 99 Applications Ware Applications Ware Introduction This section explains how the Applications Ware are organized, implemented, and modified. Applications Ware Licenses and Upgrades The Applications Ware is divided into three base licenses and three license upgrades for Vanguard products.
Part No. T0001-43, Rev B February, 2003 Page 4 of 99 Applications Ware Software Upgrade Options Introduction If you are upgrading the software in your network, do not skip releases. You must upgrade to each intermediate release to ensure the integrity of your configuration memory (CMEM). This upgrade procedure applies to all Vanguard products. Upgrade your software by using the step-by-step upgrade option or use the Software Upgrader application. Both upgrade options are listed below.
Part No. T0001-43, Rev B February, 2003 Page 5 of 99 Applications Ware Software Upgrader The Software Upgrader is a Window-based PC application that eliminates the Application release-by-release upgrade process, by converting an existing image file to the latest Application Ware release in a single step. Once you have an upgraded CMEM, use Vanguard Configuration Loader to load the CMEM into your Vanguard.
Part No. T0001-43, Rev B February, 2003 Page 6 of 99 Applications Ware License Upgrades Introduction The License Upgrades differ from standard Applications Ware packages in that they do not operate in a “stand-alone” capacity. For example, if you want the functions available in the SNA+ Applications Ware, you purchase that license and load it into your unit. However, a License Upgrade cannot be loaded into a unit by itself.
Part No. T0001-43, Rev B February, 2003 Page 7 of 99 Applications Ware Memory Requirements for Vanguard Applications Ware Release 6.2.R000 Memory Changes for Release 6.2.R000 In order to support the Vanguard Applications Ware Release 6.2.R000, some Vanguard products require memory upgrades. The total memory required for each product at release 6.2.R000 is listed in this table: Product Total Memory Required at Release 6.2.
Part No. T0001-43, Rev B February, 2003 Page 8 of 99 Products Supported Products Supported Products Supported for Release 6.2.R000 Products supported by release 6.2.R000: Product Support Vanguard 320 Normal product release. Vanguard 340 Normal product release. Vanguard 342 Normal product release. Vanguard 6435 and 6455 Normal product release. Vanguard 7310 and 7330 Normal product release. (Version 1 and 2) Products Not Supported Release 6.2.
New Features Part No. T0001-43, Rev B February, 2003 Page 9 of 99 New Features Introduction The new features available for Release 6.2.R000 are described briefly below. This section also lists where to find user documentation that contains detailed explanations of these features. Documentation on the Web You can find detailed descriptions of the new Release 6.2.R000 features in the referenced documents at the following web site: http://www.vanguardms.
Part No. T0001-43, Rev B February, 2003 Page 10 of 99 New Features Warning Your Vanguard product was designed and certified for use with specific memory option SIMMs. It is IMPORTANT that you install only the devices that are certified for use with your Vanguard product. Installation of an incorrect FLASH SIMM module could result in damage to the SIMM device or your Vanguard Product. Please see the list below for the memory device that is compatible with your hardware platform.
Part No. T0001-43, Rev B February, 2003 Page 11 of 99 New Features Warning Your Vanguard product was designed and certified for use with specific memory option SIMMs. It is IMPORTANT that you install only the devices that are certified for use with your Vanguard product. Installation of an incorrect FLASH SIMM module could result in damage to the SIMM device or your Vanguard Product. Please see the list below for the memory device that is compatible with your hardware platform.
New Features Part No. T0001-43, Rev B February, 2003 Page 12 of 99 Vanguard V.90 Daughtercard A V.90 Daughtercard provides dial back-up for a customers PPP async applications. The V.90 enables our service organization to dial in to a customer node and get a CTP prompt to configure or debug a customers node. The V.90 Daughtercard connects to the Vanguard 320, 340, 342, 6435 and 6455 through a 68-pin connector. For more information, refer to the Vanguard Daughtercard Guide (Part Number T0020). Release 6.1.
Part No. T0001-43, Rev B February, 2003 Page 13 of 99 New Features Vanguard 7300 Series Routers - Version 1 and Version 2 Release 6.1 Vanguard 7300 Chassis Redesign (Version 2) The Vanguard 7300 Series chassis has been redesigned. The redesigned chassis is referred to as The Vanguard 7300 Series Version 2. Software must be configured to match the chassis type and version.
Part No. T0001-43, Rev B February, 2003 Page 14 of 99 New Features Verification Verification can be done by checking the Chassis Version printed at the top right of page one of the Detailed Node Statistics. Node: 7310_1 Address: 100 Date: 13-AUG-2002 Time:15:53:07 Detailed Node Statistics Page: Product Type: VANGUARD 7310 1 of 11 Chassis Version: 2 Bootprom Revision: V1.50 Figure 1.
Part No. T0001-43, Rev B February, 2003 Page 15 of 99 New Features Diagnostics ZAP Mode Menu (Rev: 1.6) =============================================================== Exit 1 - Force ColdLoad 3 - Activate Alternate CMEM 2 - Activate Current CMEM 4 - Clear All CMEM 5 - Change Chassis Version Selection: 5 Change Chassis Version [1/2] ? (Currently set to 1): ==>> or (Currently set to 2) Figure 2.
Part No.
Part No.
Part No. T0001-43, Rev B February, 2003 Page 18 of 99 Vanguard Feature Comparison Chart Feature Vanguard 6560 Vanguard 6450/6455 Vanguard 7300 AS/400 5494 Communications Server Protocols: LLC2, X.25 (QLLC), SDLC, FR (RFC1490) Characteristics: HDX, FDX, TWA Network:QLLC/X.25/Frame Relay (Annex G) Frame Relay (RFC1490) Host Protocols: LLC2, Frame Relay (RFC1490) LAN: Token Ring (4 or 16 mbps), Ethernet 802.3 (10 mbps), Ethernet2. WAN Physical Interface: V.21, V.24, V.35 Protocols: LLC2, X.
Part No.
Part No. T0001-43, Rev B February, 2003 Page 20 of 99 Vanguard Feature Comparison Chart Software Configuration Limits Introduction This section describes the software configuration limits.
Part No.
Part No. T0001-43, Rev B February, 2003 Page 22 of 99 Vanguard Feature Comparison Chart Software Configuration (continued) 7300 Series 6435/55 Voice Number of voice switching table entries: An increase to the voice switching table entries from 3,000 to 6,000 on the 6435 and 6455 platforms is available with Service Pak 6.1.S100 and greater software. 10,000 6,000 1,000 250 2,000 500 Number of bridge links entries (7300 Series original size - 250) 1,000 1,000 ARP (queue size) 50 50 Max.
Part No.
Part No. T0001-43, Rev B February, 2003 Page 24 of 99 Boot Prom Software Updates Boot Prom Software Updates Introduction This section provides instructions for Coldloading the Boot prom using Software Loader or Procomm Communication software. Software Loader Software Loader automatically upgrades or downgrades the boot prom. When an image is loaded and it requires a version of bootprom different from the one currently loaded, Software Loader changes the boot prom to successfully load the image.
Part No. T0001-43, Rev B February, 2003 Page 25 of 99 Boot Prom Software Updates Figure 3. Bootprom Revision Example 2) Use the Procomm application to update the Bootprom. Open the Procomm application to get a Data Terminal Window. The settings should be 9.6k, N-8-1, and RAW-ASCII transfer mode. Use a regular Control Terminal Port (CTP) connection. 3) Activate a Force Cold-Load (16.12.y.y): Flash Memory->Force-Cold-Load->yes Cold Boot the node (7.5.
Boot Prom Software Updates Part No. T0001-43, Rev B February, 2003 Page 26 of 99 5) Download the appropriate coldloader to your PC for the correct Bootprom version, from the following directory example: C:\Vanguard\SFW_IMGS\73*0\COLDLOAD\T10BP1** Note You must use the coldloader from the current bank column of the table in step 4 to load the Bootproms.
Boot Prom Software Updates Procomm Setup Part No. T0001-43, Rev B February, 2003 Page 27 of 99 When Options->Data Options->Transfer Protocol is selected, a Setup menu displays. • Select RAW ASCII from the Current Transfer Protocol pull down menu • Click the Transfer Protocols button Figure 5.
Part No. T0001-43, Rev B February, 2003 Page 28 of 99 Boot Prom Software Updates Send File To send a file, open the Procomm application. Under the Data Menu select Send File. This button also Sends Files. Figure 6. Procomm Plus Terminal Send File Send the correct file using one of the enclosed “c73 loaders” below: c73cv115.xrc for 115 Kbps c73cv288.xrc for 28.8 Kbps c73cv192.xrc for 19.2 Kbps c73cv384.xrc for 38.4 Kbps c73cv576.xrc for 57.6 Kpbs c73cv96.xrc for 9.
Part No. T0001-43, Rev B February, 2003 Page 29 of 99 Boot Prom Software Updates 9) Choose the correct bootprom directory that includes the coldloaders. The example below shows the 7300 Series Bootprom Directories. \T10BP1** refers to: • • • • • T10BP110 T10BP111 T10BP130 T10BP140 T10BP150 Bootprom Directory ONS Image Compatibility Bootprom Version T10BP110 5.4.P08A 5.4.P08B 1.10 T10BP111 5.4.P08# 1.11 Note The pound sign “#” represents a letter from C to Z. T10BP130 5.4.P0LA, 5.4.P0KA, and 5.
Boot Prom Software Updates Directory Example Part No. T0001-43, Rev B February, 2003 Page 30 of 99 Figure 7 shows a Vanguard 7310 Directory selected. C:\Vanguard\SFW_IMGS\7310\COLDLOAD Note Under the SFW_IMGS directory all the Vanguard products are listed. To select a Vanguard 6455 the path would be: C:\Vanguard\SFW_IMGS\6455\COLDLOAD C: Vanguard SFW_IMGS 7310 COLDLOAD Figure 7. COLDLOAD Directory 10)Once completed, the 7300 shows “Restarting”. Change your terminal speed immediately back to 9600.
Boot Prom Software Updates Part No. T0001-43, Rev B February, 2003 Page 31 of 99 Note If the ONS images are not compatible, the node responds by removing the current image and prompts the user with a “download coldloader” message. If you received this message check the table in step 9. The table contains the correct compatibility information. To load a compatible ONS image, repeat these steps substituting the ONS image instead of the bootprom image instruction in step 8.
Boot Prom Software Updates Controller Card Board Assembly Number Location Part No. T0001-43, Rev B February, 2003 Page 32 of 99 Refer to Figure 8 to locate your board assembly number: Label Figure 8. Board Assembly Number Label Vanguard 7300 The Vanguard 7300 Series MCP750 (part number 75836G02) system cards are CPU Card Upgrade supported by software releases 6.1.T14A and greater. If you have a part number 75836G02 system card and are running older versions of release 6.1, a new 6.
Software Improvements Part No. T0001-43, Rev B February, 2003 Page 33 of 99 Software Improvements Introduction This section describes specific improvements to the Applications Ware software. It includes: • Corrected limitations • Customer-initiated Change Requests Corrected Limitations Central Voice Switching Table - All Products Central Voice Switching Table lookups indicate the wrong entry if a blank entry exists.
Software Improvements Part No. T0001-43, Rev B February, 2003 Page 34 of 99 • Rx State = 1000 and Voice State = IDLE_UNCON - This means that the port has booted to the correct state. Figure 10 shows that the port statistics page reports the following conditions as the current port state: • Rx State = 0000 and Voice State = IDLE_UNCON - This means that the port has booted to the incorrect state. Figure 10.
Software Improvements Part No. T0001-43, Rev B February, 2003 Page 35 of 99 Vanguard 340, Vanguard 6400 Series - G.711 Coder Types Do Not Appear Under Voice Port Statistics Voice port statistics do not show that G.711 coders are available in the build. (DRCaa23042) This is fixed.
Software Improvements Part No. T0001-43, Rev B February, 2003 Page 36 of 99 SNABSC HPAD and TPAD Entries - Vanguard 6455, 7300 Series The Destination Control Unit Address and Destination Device Address parameters in the SNABSC entry in HPAD must match one of the following set of parameters of BSC3270 TPAD device table, for the device it is connecting to: (DRCaa22909) 1) BSC Control Unit Address and BSC Device Address. 2) Destination Control Unit Address and Destination Device Address.
Part No. T0001-43, Rev B February, 2003 Page 37 of 99 Software Improvements Customer Initiated Change Requests Change Request (CR#) These Change Requests were reported to Customer Service and interim patch releases were released to fix the problems. These Change Requests are incorporated into Release 6.2.R000, and where applicable, interim patch releases have been replaced by Release 6.2.R000: Limitation Number Release Where Problem Was Reported Interim Patch Release Replaced by Release 6.
Part No. T0001-43, Rev B February, 2003 Page 38 of 99 Software Improvements Change Request (CR#) Limitation Number Release Where Problem Was Reported Interim Patch Release Replaced by Release 6.2 Problem Description 11671 DRFaa20546 5.6.T16E 6.0.T1PA Vanguard 6400 Node crashes frequently when processing digital voice traffic. 11673 DRFaa20585 6.0.T1EA 6.0.T1EB Vanguard 6400 Series problem installing dual E1 into slot two.
Part No. T0001-43, Rev B February, 2003 Page 39 of 99 Software Improvements Change Request (CR#) Limitation Number Release Where Problem Was Reported Interim Patch Release Replaced by Release 6.2 Problem Description 11746 DRFaa20765 6.0.T1QA 6.0.T1QA Vanguard 6400 when a 2780 TPAD and 2780 device bid for the line at the same time a NAK/ ACK loop is generated. 11754 DRFaa20816 6.0.R000 N/A Vanguard 7300 Series SDLC statistics are not displaying correctly. 11757 DRFaa20818 6.0.
Part No. T0001-43, Rev B February, 2003 Page 40 of 99 Software Improvements Change Request (CR#) Limitation Number Release Where Problem Was Reported Interim Patch Release Replaced by Release 6.2 Problem Description 11780 DRFaa20961 6.0.sp1 6.0.T1TA When a STATUS message is received, Telenetworks software records the cause code in NLCB context. The next message to be received is overwritten (corrupted) by Telenetworks because the recorded cause code is not zero. 11782 DRFaa20925 6.0.
Part No. T0001-43, Rev B February, 2003 Page 41 of 99 Software Improvements Change Request (CR#) Limitation Number Release Where Problem Was Reported Interim Patch Release Replaced by Release 6.2 Problem Description 11881 DRFaa21196 6.2.iR00U 6.1.T12A Vanguard 7300 cannot run Channelized T1 data using 56K channels with B8ZS and ESF. 11886 DRFaa21236 6.1.T02B 6.1.T02C Vanguard 7300 conditional default route is not being advertised until node boot. 11887 DRFaa21240 6.1.S100 6.1.
Part No. T0001-43, Rev B February, 2003 Page 42 of 99 Known Software Limitations Known Software Limitations Introduction This section lists limitations known to exist in Release 6.2.R000 Applications Ware software. Vanguard 7300 Default Value for the W Window Packet Parameter In release 6.1 the default value for the W Packet Window parameter for FRI AnnexG station configuration has been changed from 2 to 7. When a 6.1 release software loaded node is connected to a 6.
Part No. T0001-43, Rev B February, 2003 Page 43 of 99 Known Software Limitations Descriptions Encrypted (SAM) Tunnel Encrypted (SAM) Tunnel over WAN/LAN with (RTP+UDP/UDP)+IP Header compression is not working for certain size UPD-IP packets where IP packet length is greater than 46 (Version 5.5 and 5.6). Compression works for IP packets where the IP packet length is less than 46. (INDaa01629) Workaround: At present, there is no workaround.
Known Software Limitations Part No. T0001-43, Rev B February, 2003 Page 44 of 99 Digital Voice Server Card - Vanguard 6400 Series T1/E1 Interface 5 will not get initialized if Interface 4 is not configured. T1/E1 Interface 7 will not get initialized if Interface 6 is not configured. (DRCaa21619) Workaround: Always configure both interfaces even if only the second interface on the card is used.
Known Software Limitations Part No. T0001-43, Rev B February, 2003 Page 45 of 99 Vanguard 6560 Input/Output Signal Level - Statistics The statistics for a Vanguard 6560 with a Voice Server Feature Card and a Vanguard 6560 with a DSPM/SM card differ in the display of the Input/Output Signal Level. For a Voice Server Feature Card: • The input signal level statistic displays the actual input level on the line. This differs from the DSPM/SM card which displays the input level after gain/loss adjustments.
Known Software Limitations Part No. T0001-43, Rev B February, 2003 Page 46 of 99 Workaround: The three digit Hunt Group must be used. If you need to target a virtual port, that virtual port should have a unique Hunt Group value. Software Image Naming Convention is Different - Alternate and Current Vanguard 7300 Series The software image naming convention is different for the Vanguard 7300 platform.
Known Software Limitations Part No. T0001-43, Rev B February, 2003 Page 47 of 99 Password Limitation BGP - All Products The Vanguard Router supports limited passwords. Cisco supports MD5. Currently we do not have Authentication compatible with Cisco. MD5 should be supported in the Vanguard products in future releases. (DRFaa18829) Workaround: At present, there is no workaround.
Known Software Limitations Part No. T0001-43, Rev B February, 2003 Page 48 of 99 Vanguard 7300 Series Call Not Transferred with ALT-Dest set in VST When placing a call from either an FXS, FXO or E&M to H.323 and the destination does not answer the phone (ALT_DEST_NO_ANSER) or the phone is busy (ALT_DEST) and the alternate destination is either an FXS, FXO or E&M, there is no audio. (DRCaa22329) Workaround: At present, there is no workaround.
Known Software Limitations Part No. T0001-43, Rev B February, 2003 Page 49 of 99 Large SDLC-to-LLC2 (SLAC) Calling Addresses - All Products For incoming X.25 calls over Frame Relay SVC, Vanguard network services updates the X.25 table with calling address and station ID, interpreting the calling address as XX...X**. That is, the last two digits are assumed to be sub address and the rest as node address.
Known Software Limitations Part No. T0001-43, Rev B February, 2003 Page 50 of 99 Vanguard 6455 Conversion Options in Vanguide Builder When creating an image for the Vanguard 6455 using the Vanguide builder, the LLC-TR and LLC-FR LLC-to-SDLC Conversion options do not appear under the BSC-to-SNA Conversion option. Only LLC-ETH appears and this is automatically selected.
Known Software Limitations Part No. T0001-43, Rev B February, 2003 Page 51 of 99 Vanguard 7300 NAT Node Reset If a large number of NAT entries are configured each having multiple interfaces, upon a Boot-Router-NAT-ALL the router could reset (with an FER) instead of just booting the NAT entries. (DRFaa20065) Workaround: In order to avoid having the router reset, only configure a single interface per NAT entry.
Known Software Limitations Part No. T0001-43, Rev B February, 2003 Page 52 of 99 All Vanguards Using Radius and HP Openview - Two RADIUS MIB Files Corrupted Two RADIUS MIB files were corrupted on the 6.2 CD: rfc2618a.mib and rfc2620a.mib. This caused a problem with the HP Openview MIB complier. Workaround: Download the corrected versions of the .mib files from our external web site at: http://www.vanguardms.com/support/software_and_tools/vanguard/mibs/ Files "mib62ux.zip" and "mib62pc.
Documentation Supplements Part No. T0001-43, Rev B February, 2003 Page 53 of 99 Documentation Supplements Introduction This section lists supplemental information to the current set of user documentation. Documentation Supplements Fax Over H.323 Backward Compatibility Fax over H.323 is not backward compatible with pre-5.4 versions of software.
Part No. T0001-43, Rev B February, 2003 Page 54 of 99 User Documentation User Documentation Organization User documentation supporting the 6.2 Applications Ware is organized as: • Vanguard Applications Ware Basic Protocols • IP and LAN Feature Protocols • SNA Feature Protocols • Serial Feature Protocols • Multiservice Feature Protocols • Multimedia Feature Protocols Each of these sets, which are available on our website, consists of several manuals.
User Documentation Part No.
Part No. T0001-43, Rev B February, 2003 Page 56 of 99 User Documentation • • • • • Multi-Service Feature Protocols TNPP (Part Number T0102-11) TPDU (Part Number T0102-12) SPP (Part Number T0102-13) AC100 (Part Number T0102-14) ALC (Part Number T0102-15) The Multi-Service Feature Protocols Manual (T0103) consists of these manuals: • Internal DSD (Part Number T0103-02) • Multipoint X.
How to Obtain User Documentation Part No. T0001-43, Rev B February, 2003 Page 57 of 99 How to Obtain User Documentation Introduction There are two ways to obtain software documentation: • Download the most current, up-to-date document files from the On-line Library on our World Wide Web page. • Use the electronic navigation and search capability provided on the Vanguide 6.2.R000 CD-ROM.
How to Obtain User Documentation Keeping a Set of Manuals Current Part No. T0001-43, Rev B February, 2003 Page 58 of 99 Keep a current set of documentation for Release 6.2.R000. To download a current printed set acquire a: • Connection to the Vanguard Managed Solutions product documentation website: http://www.vanguardms.com/support/documentation • Printer • Copy of Adobe Acrobat for your platform Download manuals from the WWW for the desired features you need.
Vanguide CD-ROM with Vanguard Software Builder Part No. T0001-43, Rev B February, 2003 Page 59 of 99 Vanguide CD-ROM with Vanguard Software Builder Introduction With Release 5.3, the Vanguide and Vanguide Plus! CD-ROMs are consolidated into one CD-ROM called Vanguide CD-ROM with Software Builder. Vanguard Software Builder is now included on the Vanguide CD-ROM. This software application was previously available as a separate product on the Vanguide Plus! CD-ROM.
Part No. T0001-43, Rev B February, 2003 Page 60 of 99 Applications Ware for the Vanguard 320 Applications Ware for the Vanguard 320 Introduction Vanguard 320 supports Vanguard Managed Solution’s broad library of protocols, thereby providing a diverse set of solutions via a single hardware platform. Vanguard 320 offers multiprotocol access, depending on the Applications Ware Package you purchase. Vanguard 320 must be ordered with one of the Applications Ware listed in the tables in this section.
Part No. T0001-43, Rev B February, 2003 Page 61 of 99 Applications Ware for the Vanguard 320 Vanguard 320 Features IP+ SNA+ MultiService SNMP D D D TELNET D D D TFTP D D D CLI D D D Embedded Web HTTPD L L L ATPAD D D D APAD L L L SoftSCC L L L ISDN-NOAM L L L ISDN-EURO L L L ISDN-ASIA L L L Voice Special Network Management Async ISDN Vanguard Voice Relay G.723 D A G.729 L A CVSELP L A H.
Part No.
Part No. T0001-43, Rev B February, 2003 Page 63 of 99 Applications Ware for the Vanguard 320 Vanguard 320 Features (continued) IP+ SNA+ MultiService SMDS L MX25 L PPP L L L PPPoE L L L SoTCP (=Voice Relay Enc. In IP) L L L Fractional T1/E1 L L L L L L Voice Special ATM Protocols ATM Protocols Serial Asynchronous Protocols ASYNC-BYPASS IBM2260 SLIP A L L L TNPP A TNPP-ROUT L X.
Part No.
Part No. T0001-43, Rev B February, 2003 Page 65 of 99 Applications Ware for the Vanguard 320 Vanguard 320 Features (continued) IP+ SNA+ MultiService QoS - Diff Serv (5.4) D D D FRAME Data Comp L L D Voice Special BSC 3270-to-SNA Conversion BSC 2780/3780-to-SNA LU0 Conv. AS/400 5494 Comm. Server Security and VPN Security: Encryption & VPN- DES & 3DES D: Default License Feature. L: In License; add with Software Builder.
Part No. T0001-43, Rev B February, 2003 Page 66 of 99 Applications Ware for the Vanguard 340 and 342 Applications Ware for the Vanguard 340 and 342 Introduction Vanguard 340 and 342 support Vanguard Managed Solution’s broad library of protocols, thereby providing a diverse set of solutions via a single hardware platform. Vanguard 340 and 342 offer multiprotocol access, depending on the Applications Ware Package you purchase.
Part No. T0001-43, Rev B February, 2003 Page 67 of 99 Applications Ware for the Vanguard 340 and 342 Vanguard 340 and 342 Features IP+ SNA+ MultiService SNMP D D D TELNET D D D TFTP D D D CLI D D D Embedded Web HTTPD L L L ATPAD D D D APAD L L L SoftSCC L L L ISDN-NOAM L L L ISDN-EURO L L L ISDN-ASIA L L L Voice Security Network Management Async ISDN Vanguard Voice Relay G.723 & G.711 D A G.729 & G.711 L A CVSELP & G.711 L A H.
Part No.
Part No. T0001-43, Rev B February, 2003 Page 69 of 99 Applications Ware for the Vanguard 340 and 342 Vanguard 340 and 342 Features (continued) IP+ SNA+ MultiService Voice Security FR SVC X.25 Special A D D D SMDS L MX25 L PPP D D D PPPoE L L L SoTCP (=Voice Relay Enc. In IP) L L L Fractional T1/E1 L L L D D D ATM Protocols All Supported ATM Protocols Serial Asynchronous Protocols ASYNC-BYPASS IBM2260 SLIP A D D D TNPP A TNPP-ROUT L X.
Part No.
Part No. T0001-43, Rev B February, 2003 Page 71 of 99 Applications Ware for the Vanguard 340 and 342 Vanguard 340 and 342 Features (continued) IP+ SNA+ MultiService TOW D D D QoS - Protocol Priority (5.3M) L L L QoS - Diff Serv (5.4) D D D FRAME Data Comp L L D Voice Security BSC3270-to-SNA Conversion BSC2780/3780-to-SNA/LU0 Conv. AS/400 5494 Comm. Server Security and VPN Security: Encryption & VPNDES & 3DES D: Default License Feature. L: In License; add with Software Builder.
Part No. T0001-43, Rev B February, 2003 Page 72 of 99 Applications Ware for the Vanguard 6435/6455 Applications Ware for the Vanguard 6435/6455 Introduction This section provides detailed information about the Applications Ware available for Vanguard 6435 and the Vanguard 6455. Vanguard 6345/ 6455 Applications Ware Release 6.2.R000 makes available the following Applications Ware for the Vanguard 6435/6455. Each Applications Ware supports a suite of default features.
Part No. T0001-43, Rev B February, 2003 Page 73 of 99 Applications Ware for the Vanguard 6435/6455 Vanguard 6435 Features IP+ SNA+ MultiService SNMP D D D TELNET D D D TFTP D D D CLI D D D Embedded Web (HTTPD) L L L ATPAD D D D APAD L L L ISDN-NOAM L L L ISDN-EURO L L L ISDN-ASIA L L L Voice Security * AS/400 BSC Network Management Async ISDN SoftSCC Vanguard Voice Relay G.723 & G.711 D A G.729 & G.711 L A CVSELP & G.711 L A H.
Part No.
Part No. T0001-43, Rev B February, 2003 Page 75 of 99 Applications Ware for the Vanguard 6435/6455 Vanguard 6435 Features (continued) FRF12 IP+ SNA+ MultiService L L L L L D D FRA (only for backward Voice Security * AS/400 BSC Special compatibility) FRI (includes FRI) D A FR SVC X.25 D D D SMDS L MX25 L PPP D D D PPPoE L L L SoTCP (=Voice Relay Enc.
Part No.
Part No. T0001-43, Rev B February, 2003 Page 77 of 99 Applications Ware for the Vanguard 6435/6455 Vanguard 6435 Features (continued) IP+ DSCOPE SNA+ MultiService L L Voice Security * AS/400 BSC L DSD L NCCP L A BCST L L L TOW D D D QoS - Protocol Priority (5.3M) L L L QoS - Diff Serv (5.4) D D D FRAME Data Comp L L D NUI QOS Features BSC 3270-to-SNA Conversion BSC 2780/3780-to-SNA LU0 Conversion A AS/400 5494 Comm.
Part No. T0001-43, Rev B February, 2003 Page 78 of 99 Applications Ware for the Vanguard 6435/6455 Vanguard 6455 Features IP+ SNA+ MultiService SNMP D D D TELNET D D D TFTP D D D CLI D D D Embedded Web (HTTPD) L L L ATPAD D D D APAD L L L ISDN-NOAM L L L ISDN-EURO L L L ISDN-ASIA L L L Voice Security * AS/400 BSC Network Management Async ISDN SoftSCC Vanguard Voice Relay G.723 & G.711 D A G.729 & G.711 L A CVSELP & G.711 L A H.
Part No.
Part No. T0001-43, Rev B February, 2003 Page 80 of 99 Applications Ware for the Vanguard 6435/6455 Vanguard 6455 Features (continued) IP+ SNA+ MultiService L L L L L D D Voice Security * AS/400 BSC Special Network Protocols FRF12 FRA (only for backward compatibility) FRI (includes FRA) D A FR SVC X.25 D D D SMDS L MX25 L PPP D D D PPPoE L L L SoTCP (=Voice Relay Enc.
Part No.
Part No. T0001-43, Rev B February, 2003 Page 82 of 99 Applications Ware for the Vanguard 6435/6455 Vanguard 6455 Features (continued) IP+ DSCOPE SNA+ MultiService L L Voice Security * AS/400 BSC L DSD L NCCP L A BCST L L L TOW D D D QoS - Protocol Priority (5.3M) L L L QoS - Diff Serv (5.4) D D D FRAME Data Comp BSC 3270-to-SNA Conversion L L D NUI Special QOS Features A BSC 2780/3780-to-SNA LU0 Conversion A AS/400 5494 Comm.
Applications Ware for the Vanguard 7300 Series Products Part No. T0001-43, Rev B February, 2003 Page 83 of 99 Applications Ware for the Vanguard 7300 Series Products Introduction This section provides detailed information about the Applications Ware available for Vanguard 7300. Vanguard 7300 Applications Ware Release 6.2.R000 makes available the following Applications Ware for the Vanguard 7300. Each Applications Ware package supports a suite of default features.
Part No.
Part No. T0001-43, Rev B February, 2003 Page 85 of 99 Applications Ware Features Vanguard 7300 Features (continued) IP+ SNA+ MultiService OSPF D D D BGP4 D D D Bandwidth on Demand (LD-Bal) D D D IP-Multicast D D D Router Proxy D D D Router Discovery D D D Network Address Translation D D D Policy-Based Routing D D D RTP Header Compression D D D Token Ring D D D Eth-Bridge D D D DHCP Client D D D Radius D D D FRF.
Part No. T0001-43, Rev B February, 2003 Page 86 of 99 Applications Ware Features Vanguard 7300 Features (continued) IP+ SNA+ MultiService TOW D D D QoS - Diff Serv (5.4) D D D Data Compression D D D BSC 3270-to-SNA Conversion D D BSC 2780/3780-to-SNA LU0 Conversion D D AS/400 Special QOS Features SNA Features AS/400 5494 Comm.
Part No. T0001-43, Rev B February, 2003 MIB Downloading Instructions for Non-Vanguard Managed Solutions SNMP Managers Page 87 of 99 MIB Downloading Instructions for Non-Vanguard Managed Solutions SNMP Managers Introduction This section lists Vanguard MIB files needed for SNMP management of Vanguard devices when using a non-Vanguard Managed Solutions SNMP Network Management System (NMS). Obtaining MIB Files Vanguard MIB files for your non-Vanguard Managed Solutions NMS are available from the Vanguide 6.2.
Part No. T0001-43, Rev B February, 2003 MIB Downloading Instructions for Non-Vanguard Managed Solutions SNMP Managers Page 88 of 99 • Execute the parsedff program. Example c:\Vanguard\motnm\6.2dffs> ..\bin\parsedff.exe MOTNAv340.dff ..\db\nmdb.db MOTNAv340.dff -> is the dff file to be parsed. ..\bin\parsedff.exe -> is where the parsedff.exe program is located. • Executing this program results in users getting the message parsed successfully.
Part No. T0001-43, Rev B February, 2003 MIB Downloading Instructions for Non-Vanguard Managed Solutions SNMP Managers Page 89 of 99 Required Files and The following MIB files are required by your NMS to perform SNMP management Loading of Vanguard products: • rfc1213.mib • cdx_6500.mib These files must be loaded first and in the order shown. After you load these required files onto your NMS, you can load the MIB files for the options and protocols installed on your Vanguard hardware.
Part No. T0001-43, Rev B February, 2003 MIB Downloading Instructions for Non-Vanguard Managed Solutions SNMP Managers Page 90 of 99 Download This MIB File If you want this option, protocol, or base MIB software (continued) isdn.mib ISDN protocol iso3201.mib 3201 protocol mx25.mib MX.25 protocol ncrbsc.mib NCR Binary Synchronous protocol ns.mib Network Service (required file) pad.mib PAD protocol ping_opt.mib Remote Ping Option qos.
Part No. T0001-43, Rev B February, 2003 MIB Downloading Instructions for Non-Vanguard Managed Solutions SNMP Managers Page 91 of 99 Download This MIB File If you want this option, protocol, or base MIB software (continued) spp.mib SPP protocol ss.mib Switched Services (required file) t1e1vg.mib Fractional T1E1 Interface option t1.mib Physical T1 port t1e1.mib Virtual T1/E1 port mapping table tbop.mib TBOP protocol tcop.mib TCOP protocol tdlc.mib TDLC protocol tftp.
Part No. T0001-43, Rev B February, 2003 Page 92 of 99 Applications Ware RFC Compliance Applications Ware RFC Compliance Listing This table identifies the RFCs (Request for Comments) with which Vanguard Applications Ware software is compliant. RFC Description 768 User Datagram Protocol. J. Postel. Aug-28-1980. 791 Internet Protocol. J. Postel. Sep-01-1981. 792 Internet Control Message Protocol. J. Postel. Sep-01-1981. Not all messages covered by RFC 792 are supported by Vanguard Applications Ware.
Part No. T0001-43, Rev B February, 2003 Page 93 of 99 Applications Ware RFC Compliance RFC Description (continued) 1009 Requirements for Internet Gateways R.Braden, J. Postel. Jun-01-1987. 1042 Standard For The Transmission Of IP Datagrams Over IEEE 802 Networks. J. Postel, J.k. Reynolds. Feb-01-1988. 1055 Nonstandard For Transmission Of IP Datagrams Over Serial Lines: SLIP. J.l. Romkey. Jun-01-1988. 1058 RIP Version 2 Carrying Additional Information. G. Malkin. January 1993.
Part No. T0001-43, Rev B February, 2003 Page 94 of 99 Applications Ware RFC Compliance RFC Description (continued) 1213 Management Information Base For Network Management Of TCP/IP-based Internets:MIB-II. K. Mccloghrie, M.t. Rose. Mar-01-1991. 1215 A Convention for Defining Traps for use with the SNMP. M. Rose, Editor, Performance Systems International. March 1991. 1231 IEEE 802.5 Token Ring MIB. K. Mccloghrie, R. Fox, E. Decker. May-01-1991. 1250 IAB Official Protocol Standards. J. Postel.
Part No. T0001-43, Rev B February, 2003 Page 95 of 99 Applications Ware RFC Compliance RFC Description (continued) 1490 Multiprotocol Interconnect Over Frame Relay. T. Bradley, C. Brown, & A. Malis. July 1993. 1517 Applicability Statement For The Implementation Of Classless Inter-Domain Routing (CIDR). Internet Engineering Steering Group, R. Hinden. September 1993. 1518 An Architecture For IP Address Allocation With CIDR. Y. Rekhter & T. Li. September 1993.
Part No. T0001-43, Rev B February, 2003 Page 96 of 99 Applications Ware RFC Compliance RFC Description (continued) 1918 Address Allocation for Private Internets. Y. Rekhter, B. Moskowitz, D. Karrenberg, G. J. de Groot & E. Lear. February 1996. 2131 Dynamic Host Configuration Protocol. R. Droms, Bucknell University, March, 1997. 2132 DHCP Options and BOOTP Vendor Extensions. S. Alexander, Silicon Graphics, Inc., R. Droms, Bucknell University. March 1997.
Product Declarations and Regulatory Information Part No. T0001-43, Rev B February, 2003 Page 97 of 99 Product Declarations and Regulatory Information The following sections provide information about standards compliance, safety statements, and Type Approvals. Warnings And Cautions The following special notices apply to all equipment handling procedures in this installation guide. Warning Ports capable of connecting to ports on other apparatus are defined as Safety Extra Low Voltage (SELV).
Product Declarations and Regulatory Information Part No. T0001-43, Rev B February, 2003 Page 98 of 99 Declarations of Conformity English Declaration of Conformity: Hereby, Vanguard Managed Solutions declares that this Vanguard Router is in compliance with the requirement and other relevant provisions of Directive 1999/5/EC.
Product Declarations and Regulatory Information Part No. T0001-43, Rev B February, 2003 Page 99 of 99 Italian Dichiarazione di conformità: Con la presente Vanguard Managed Solutions dichiara che il router Vanguard soddisfa i requisiti essenziali e le altre disposizioni pertinenti della direttiva 1999/5/CE.
