User guide

2. CONTROLS (CONT’D)

2.3 PLATINUM MAIN CONTROL (FOR HRV 90H-V ECM, ERV 90H-V ECM

AND 60H NOVO+ UNITS ONLY)

For more convenience, these units can also be controlled using a main control.

Only one main control can be connected per unit.

NOTES: 1. The integrated control must be turned OFF to use a main control.

2. If an optional auxiliary control is used, if activated, this auxiliary control will

override the optional main control

PLATINUM WALL CONTROL KEYS AND INDICATORS

MODE/PREF KEY

Press and hold this key for 3 seconds to access Preference setting menu.

MODE

PREF



Press this key to select whether Ventilation mode (air exchange with

the outside), Recirculation mode (air recirculation within the house) or

Program mode (the operation of the ventilation unit is customized by the

user. Refer to HOW TO SET PERIODS FOR PROGRAM MODE section).

Use the arrow keys to:

• Select ventilation and recirculation speeds.

• Review the programmed periods.

• Select Preference and Program values.



Press this key to enable and disable the SMART mode.

The SMART mode uses indoor relative humidity level and minimum

and maximum outside temperature values to manage the air

exchange with the outside, in order to enhance comfort in the

house.

ARROW KEYS



8 SEC.

Press on Up arrow key for 8 seconds to display interior

relative humidity level (in percentage).



SET

SET KEY

Press and hold this key for 3 seconds to access setting periods for

Program Mode.

SMART KEY



SMART

3 SEC.

MODE

PREF



Press this key to confirm the chosen option and go to the following

setting.