Wireless IR Kit Vanco Part Number: WIR-KIT WIR-TX WIR-RX Technical Support www.vanco1.com • techsupport@vanco1.
DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. WARNING 1. Do not expose this unit to water, moisture, or excessive humidity. 2. Do not install or place this unit in a built-in cabinet, or other confined space without adequate ventilation. 3.
FEATURES The WIR-KIT allows IR to be wirelessly transmitted and received up to 200m. No extra wires are needed between a source and a display to provide easy control of almost all home entertainment equipment using 915MHz RF signals. Multiple transmitters and receivers can also be added to support control from multiple zones of audio and video to multiple sources such as set-top boxes and Bluray players.
SPECIFICATIONS • Compatible with most universal full band carrier frequency infrared Remote • Frequency hopping technology to minimize RF interference • Digital encrypted to ensure safety and reliability • IR frequency: 20kHz-60kHz • Dual-band IR • Power: 5VDC, 500mA • 433MHz RF resistant • Operating Temperature: 14-158 degrees Fahrenheit • Transmitter/Receiver Dimensions: 45mm diameter x 15mm • IR TX Dimensions: 10mm x 5mm x 5mm • IR RX Dimensions: 20mm x 5mm x 5mm PACKAGE CONTENTS WIR-KIT • (1) Wireless
CONNECT AND OPERATE 1. Place the IR receiver(s) in your desired location(s). 2. Place the IR emitter(s) on the device(s) you want to control. The emitter should be placed directly on the IR sensor of the device you are trying to control. 3. Plug the IR receiver in the IR receiver jack on the wireless receiver and plug the IR emitters into the emitter jacks of the connecting block. 4. Connect the power supply to each end.
PAIRING FEATURE Additional Transmitter and Receiver Units are sold separatly for expanding WIR-KIT: 10 discrete channels allow for pairing of up to 10 sources and 10 displays within the same installation environment (Additional Transmitters and Receivers sold separately) WIR-TX: Additional Transmitter Unit for WIR-KIT intended for expanding to allow for multiple sources WIR-RX: Additional Receiver Unit intended for expanding WIR-KIT Transmitter signal to multiple displays Wireless IR Transmitter Wireless
LIMITED WARRANTY With the exceptions noted in the next paragraph, Vanco warrants to the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a period of two years from the date of purchase. Should this product, in Vanco’s opinion, prove defective within this warranty period, Vanco, at its option, will repair or replace this product without charge. Any defective parts replaced become the property of Vanco.
Vanco® International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.vanco1.
