HOME THEATER HDMI® HDBaseT Lite Extenders Vanco Part Number: 280766 280767 Technical Support www.vanco1.com • info@vanco1.
DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters. WARNING 1. Do not expose this unit to water, moisture, or excessive humidity. 2.
FEATURES The Vanco 280766 and 280767 HDMI HD Base T Lite™ Extenders over 1xUTP consist of a transmitter and a receiver, which can support up to a 70 meter distance (229 ft) between the transmitter and the receiver by utilizing a single Cat 5e or Cat 6 UTP cable. This extender includes a Super IR system, which allows for IR control of the source from the display or of the display from the source.
HDMI® HDBaseT Lite Wall Plate Extender Part # 280767 • Features HDBaseT Lite Technology that transmits uncompressed full HD digital video, audio, and control signals through a single 70m/229ft Cat5e/6 cable with RJ45 connectors • FullHD1080P • Transmission Range: Extends 1080p resolutions up 229 ft over a single Cat 5e or Cat 6 cable • Tested for Compatibility with all leading HD Video brands • Super IR control system, IR transport channel can be forward or backward • (2) 5V DC Power Supplies • Suppo
CONNECT AND OPERATE 1. Connect signal source (Blu-Ray, PS3, or cable/satellite receiver) to the HDMI In transmitter port using a short (16 ft or less) HDMI cable. 2. Connect the display (LCD, LED, or Plasma HDTV) to the HDMI Out port of the receiver using a short (16 ft or less) HDMI cable. 3. Connect a long (229 ft or less) Cat 5e or Cat 6 cable to the output RJ-45 jack of the transmitter. 4. Connect the other end of the long Cat 5e or Cat 6 cable to the RJ-45 jack of the receiver. 5.
PACKAGE CONTENTS Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton: • 1 Transmitter • 1 Receiver • 2 5 VDC Power Supplies • IR TX and RX emitters • 1 Product Manual LIABILITY STATEMENT Every effort has been made to ensure that this product is free of defects. The manufacturer of this product cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use.
TECHNICAL SUPPORT In case of problems, please contact Vanco Technical Support by e-mail at support@Vanco1.com or call 1-800626-6445 between the hours of 8am and 5pm central US time zone on Monday through Friday. When calling, please have the Model Number, Serial Number (affixed to the bottom of the unit) and Invoice available for reference during the call.
Vanco® International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.vanco1.
