Specifications

HDMI0404/0808MHDBT
Operating your system
Manual operation
You can operate switching between sources manually by using the up and down buttons labelled ‘TV
1, 2, 3 or 4’ situated on the central hub front panel. Simply press the up or down button that
corresponds to the TV output that you wish to change HDMI source on and toggle through until the
desired HDMI input source video is being displayed. A numerical LED indicates which HDMI source
input is being shown at each TV location.
Remote Control operation
Included with the system is a small Remote Control (shown). This can operate the system from
directly in front of the main unit, via the IR Ext cable and also via the IR RX cables connected to TV
Receivers. (Sometimes referred to as the 'magic eye' cable) (Additional remotes are available to
purchase).
Control via RS232 comms port
Contact [e-mail] for third party home controller integration drivers.
www.antiference.co.uk
1
2