4K HDMI® SPLITTERS 4K HDMI® Splitters Part Numbers: EVSP4K12 1x2 EVSP4K14 1x4 EVSP4K18 1x8 www.vanco1.com • 800.626.
DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters. WARNING 1. Do not expose this unit to water, moisture, or excessive humidity. 2.
FEATURES INTRODUCTION The Evolution by Vanco EVSP4K12, EVSP4K14 and EVSP4K18 with HDCP 2.2, 4K/60Hz, and 4:4:4 chroma capability, are the most up to date HDMI splitters that are compliant with HDCP 2.2 displays and sources. Also features EDID management, with different modes to ensure compatibility with source and display combinations. Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio for advanced audio setups.
1x4 HDMI® 4K Spiltter Part # EVSP4K14 • Transmits audio and video from a single source to 4 HDMI outputs up to 4K2K (2160p) Ultra High Definition resolution without any loss of quality or resolution • • • • • • • • • • Supports video formats up to 4K2K@60Hz with 12bit YCBCR 4:4:4 and HDR 3D frame sequential video format up to 1080p@60 Supports high resolution VESA mode video format up to QSXGA 2560x2048@60Hz Compliant with HDCP 2.
1x8 HDMI® 4K Spiltter Part # EVSP4K18 • Transmits audio and video from a single source to 4 HDMI outputs up to 4K2K (2160p) Ultra High Definition resolution without any loss of quality or resolution • • • • • • • • • • Supports video formats up to 4K2K@60Hz with 12bit YCBCR 4:4:4 and HDR 3D frame sequential video format up to 1080p@60 Supports high resolution VESA mode video format up to QSXGA 2560x2048@60Hz Compliant with HDCP 2.
SPECIFICATIONS Video Bandwidth......................................................... 600MHz/18Gbps Input Ports................................................................. 1 × HDMI (Female type) Output Ports.............................................................. 2, 4 or 8 × HDMI (Female type), Output Resolution....................................................... 480i-1080p@50/60Hz; 2160p@24/30Hz; 2160p@60Hz; VESA Formats up to QSXGA 2560x2048@60Hz ESD Protection.............................
PANEL DESCRIPTIONS EVSP4K12 1 6 2 3 7 2 4 6 5 8 1. POWER LED: Illuminates when the splitter is connected to power 2. OUTPUT 1/2 LED: Illuminates when a display is connected to “HDMI OUT 1/2” and is powered on 3. IN LED: Illuminates when the source is connected and is powered on 4. EDID: See EDID Management section for explanation of adjustment 5. EDID: See EDID Management section for explanation of adjustment 6.
PANEL DESCRIPTIONS EVSP4K14 1 2 7 3 2 4 8 5 7 6 9 1. POWER LED: Illuminates when the splitter is connected to power 2. OUTPUT 1/2/3/4 LED: Illuminates when a display is connected to “HDMI OUT 1/2/3/4” and is powered on 3. IN LED: Illuminates when the source is connected and is powered on 4. SERVICE: Used for any future firmware updates available on the product page (downloads section) on www.vanco1.com 5. EDID: See EDID Management section for explanation of adjustment 6.
PANEL DESCRIPTIONS EVSP4K18 1 2 7 3 2 8 4 5 6 7 9 1. POWER LED: Illuminates when the splitter is connected to power 2. OUTPUT 1/2/3/4/5/6/7/8 LED: Illuminates when a display is connected to “HDMI OUT 1/2/3/4/5/6/7/8” and is powered on 3. IN LED: Illuminates when the source is connected and is powered on 4. SERVICE: Used for any future firmware updates available on the product page (downloads section) on www.vanco1.com 5. EDID: See EDID Management section for explanation of adjustment 6.
EDID MANAGEMENT Extended Display Identification Data (EDID) is a data structure provided by a digital display to describe its capabilities to a video source (e.g. graphics card or set-top box). In a nutshell, the display provides its EDID info to the source to send the proper signal format, this is essential for a proper handshake to occur.
CONNECTION DIAGRAM 800.626.
CONNECT AND OPERATE 1. Connect a source such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. to the HDMI input 2. Connect displays such as an HDTV or HD Projector to the HDMI outputs 3. For power, connect the provided power supply At this point the display connected should display the source signal connected to the unit. If no signal is being displayed, check all HDMI cables connected.
TROUBLE-SHOOTING Problems Causes Solutions Color loss or no video signal output in HDMI display The connecting cables may not be connected correctly or it may be broken. Check whether the cables are connected correctly and in working condition. The display is not compatible with the present output resolution. Make sure the resolution of the display(s) is compatible with the present resolution.
SAFETY AND NOTICE These splitters have been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment, these splitters should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
TECHNICAL SUPPORT In case of problems, please contact Vanco Technical Support by dialing 1-800-626-6445. You can also email technical support issues to techsupport@vanco1.com. When calling, please have the Model Number, Serial Number (affixed to the bottom of the unit) and Invoice available for reference during the call. Please read this Instruction Manual prior to calling or installing this unit, since it will familiarize you with the capabilities of this product and its proper installation.
® Vanco International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.vanco1.
