Information Sheet

3. Receiver MUTE Button: Once activated will cut signal and power of HDMI going to the receiver.

4. Transmitter MUTE Button: Once activated will cut signal and power of HDMI going to the transmitter.

5. Presets: Click to access, create, and edit Mapping Presets (see below)

6. Save As: Click to Save current mapping of inputs and outputs

7. Load: Click to load a previously saved mapping

8. Icon View: Shows each source and display as an icon that can be clicked/touched, dragged and dropped

9. List View: Shows each source and display

SWITCHING INPUTS and OUTPUTS

Any input can be switched to any and all outputs with ease using the EVO-IP browser-based GUI, over the cloud, or with the

EVO-IP mobile app. There are 2 ways to view and make changes to matrix mode: Tab view and List view which can be

changed by clicking on the icons located on the top right-hand corner of the window.

Tab View: Touch/Click and Drag

When Tab View is selected, simply click on or touch and hold the image of the source you want to use, drag it to the

output/display you want it to be viewed on, and drop the image onto the output. You will receive feedback the change had

been applied and within 5 seconds the preview image of the source being played on the output will be refreshed.

List View: Better for larger systems

The Tab view is great when there are not as many devices in a system but when there are hundreds of sources and displays,

clicking and dragging may be very troublesome. The list view is a great way to see all sources and displays within a system.

1. Click on List View

2. Select Mapping

3. Click on the TX/Source that is currently being played on the RX/Display. Select a new source from the

dropdown menu to switch to another TX/Source.