Information Sheet

20
1. Customizable Account name that can be associated with a specific RX/Display
2. Password to access or make changes to the account (can manually be entered or randomly selected)
3. Select specific source that the RX/Display has access to
4. Confirm changes
5. Delete
6. Apply Changes
1. Enables QR Code to be able to access account
2. When enabled, prevents any changes from occurring within the system*
a. NOTE: When ON, no new TX or RX units will be able to be discovered or setup
SETUP TAB
The setup process is what sets EVO-IP apart from the rest. This tab refreshes every 10 seconds so any device that is connected
to the system is automatically recognized within 10-20 seconds. No need to manually refresh or locate devices on the network
as the EVOIPCTL1 control box does all the work for you.