Information Sheet

6. Action

a. Mute will but the signal and power (HDMI) for the TX or RX

b. Resume will allow and pass signal and power (HDMI) for the TX and RX

c. Re-mapping will map a specific input and output

d. Cycle-Play ON/OFF (only when a RX/Display is selected in the TYPE drop-down menu)

i. When on, multiple TX/Sources can be selected and cycled through every 10-60 seconds

Once a schedule has been configured, click the ADD button on the opened Window and the APPLY button on the main screen

for use.

*NOTE: For the scheduled item to be successfully implemented and used, the time needs to be set correctly through the Smart

Controller Tab.

**NOTE: Connectivity and registration to the EVO-IP cloud is required for this feature and for mobile app control.

EVENT TAB

The ability to remotely monitor, troubleshoot, and resolve issues within a system can be found within the Event Tab of EVO-

IP. This feature is ONLY available once connected and registered to the EVO-IP cloud but helps save time and money when

trying to resolve issues within a system.