User Manual

www.vanco1.com

800.626.6445

CONNECT AND OPERATE

Connect the provided dual-IR emitter to one of the numbered “IR Emitter” ports on the connecting block

Locate the IR eye window on the source device. This can usually be seen when using a ashlight pointed at the

front of the source at an angle or can be found in the product’s user manual.

Place or stick each IR emitter onto the sources such as a Bluray player, cable or satellite box, etc. See the

illustration above for correct IR emitter placement on sources.

Note: Placement of the IR Emitter is important and can result in the IR system not working if improperly

placed.

Connect the IR Receiver to the numbered “IR Receiver” ports on the Connecting Block.

Place or stick each IR Receiver at a desired position on a display such as an HDTV or HD projector.

For power, plug in the included 12V DC Power Supply into the Connecting Block (the Connecting Block can also

be powered by the USB 5V port with a USB cable sold separately, for consistent performance and reliability,

Vanco recommends utilizing the included 12V DC power supply).

Note: Test by ensuring conrmation light on IR Receiver illuminates when sending IR controls to it.