HOME THEATER HDMI® HDBaseT Extender Vanco Part Number: 280726 Technical Support www.vanco1.com • info@vanco1.
DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters. WARNING 1. Do not expose this unit to water, moisture, or excessive humidity. 2.
FEATURES Vanco’s HDBaseT Extender consists of a transmitter and a receiver, which can support up to a 100 meter distance (328 ft) between the transmitter and the receiver by utilizing a single Cat 5e or Cat 6 UTP cable. This extender includes an IR system which allows for IR control of the source from the display. The extender supports HDMI 1080p and 3-D signals, 24 bit/36 bit deep color and various audio formats including Dolby.
SPECIFICATIONS HDMI version......................................................................... High Speed with 3D support HDCP version......................................................................... HDCP1.2 Support HDMI resolution......................................................... 1080P/1080i/720P/576i/576P/480P/480i Support video color bit............................................................ deep color 24bit/36bit Support audio format.............................................
CONNECT AND OPERATE 1. Connect the signal source (such as HD-DVD, PS3, STB) to transmitter using the HDMI In port with a HDMI output interface. 2. Connect the display device (such as HD-LCD, HD-DLP) to receiver using HDMI Out port with a HDMI input interface. 3. Connect the EIA/TIA 568B one long CAT5e/6 cable to the transmitter output RJ-45 jack. 4. Connect the EIA-TIA 568B one long CAT5e/6 cables to the receiver input RJ-45 jack. 5. Connect LCD with HDMI interface to the receiver HDMI output. 6.
LIABILITY STATEMENT Every effort has been made to ensure that this product is free of defects. The manufacturer of this product cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use. It is the responsibility of the user and installer of the hardware to check that it is suitable for their requirements and that it is installed correctly. All rights are reserved.
TECHNICAL SUPPORT In case of problems, please contact Vanco Technical Support by e-mail at support@Vanco1.com or call 1-800626-6445 between the hours of 8am and 5pm central US time zone on Monday through Friday. When calling, please have the Model Number, Serial Number (affixed to the bottom of the unit) and Invoice available for reference during the call.
Vanco® International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.vanco1.
