Specifications

Manual Van de Leur Audio 002

Remote control

Use the remote control to control volume from distance. The remote contains two buttons.

The upper one increases volume, the lower one reduces volume. The LED on the remote

indicates correct functioning. When the amplifier does not respond on button press and the

LED does not light up, the battery needs to be replaced.

To replace the battery, carefully remove the bottom cover by removing the four screw with a

Philips head screwdriver. Carefully remove the battery from the container and replace it with

a battery of the same type (CR2032). After replacement, replace the cover and firmly tighten

the four screws.

The remote operates by infrared (IR). When using the remote, make sure the front of the

remote points to the IR receiver on the amplifier, which is located on top of the POWER

button. When the LED lights up, but the amplifier does not respond, move the remote closer

to the amplifier and ensure IR visibility.