SDS

SAFETY DATA SHEET
Valvoline™ DOT 3 BRAKE FLUID
Version
1.0
Revision Date:
01/02/2019
SDS Number:
600000001626
Date of last issue: -
Date of first issue: 01/02/2019
4 / 12
regulations.
Container hazardous when empty.
Smoking, eating and drinking should be prohibited in the ap-
plication area.
For personal protection see section 8.
Conditions for safe storage
:
Keep container tightly closed in a dry and well-ventilated
place.
Further information on stor-
age stability
:
No decomposition if stored and applied as directed.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Components
CAS-No.
Value type
(Form of
exposure)
Control parame-
ters / Permissible
concentration
Basis
Diethylene glycol
111-46-6
TWA
10 mg/m3
US WEEL
Diethylene glycol monobutyl
ether
112-34-5
TWA (Inhal-
able fraction
and vapor)
10 ppm
ACGIH
Hazardous components without workplace control parameters
Components
CAS-No.
Triethylene glycol monobutyl
ether
143-22-6
Ethanol, 2-(2-propoxyethoxy)-
6881-94-3
Engineering measures
:
Provide sufficient mechanical (general and/or local exhaust)
ventilation to maintain exposure below exposure guidelines (if
applicable) or below levels that cause known, suspected or
apparent adverse effects.
Personal protective equipment
Hand protection
Remarks
:
Wear resistant gloves (consult your safety equipment suppli-
er). The suitability for a specific workplace should be dis-
cussed with the producers of the protective gloves.
Eye protection
:
Wear chemical splash goggles and face shield when there is
potential for exposure of the eyes or face to liquid, vapor or
mist.
Skin and body protection
:
Choose body protection according to the amount and con-
centration of the dangerous substance at the work place.
Wear as appropriate:
Impervious clothing
Safety shoes
Hygiene measures
:
Handle in accordance with good industrial hygiene and safety
practice.
When using do not smoke.