SDS

Page: 5
SAFETY DATA SHEET
Revision Date: 07/17/2017
Print Date: 4/18/2019
SDS Number: R0300933
SynPower™ Synthetic SAE 75W-90 Gear Oil
™ Trademark, Valvoline or its subsidiaries, registered in various
countries
VV975
Version: 1.3
5 / 17
Advice on safe handling
:
Do not breathe vapours/dust.
Do not smoke.
Persons susceptible to skin sensitisation problems or asthma,
allergies, chronic or recurrent respiratory disease should not
be employed in any process in which this mixture is being
used.
Container hazardous when empty.
Avoid exposure - obtain special instructions before use.
Avoid contact with skin and eyes.
Smoking, eating and drinking should be prohibited in the
application area.
For personal protection see section 8.
Dispose of rinse water in accordance with local and national
regulations.
Conditions for safe storage
:
Keep container tightly closed in a dry and well-ventilated
place.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Components
CAS-No.
Value type
(Form of
exposure)
Control
parameters /
Permissible
concentration
Basis
WHITE MINERAL OIL
8042-47-5
TWA
5 mg/m3
Mist
OSHA Z-1
TWA
5 mg/m3
Inhalable fraction
ACGIH
TWA
5 mg/m3
Mist
OSHA P0
TWA
5 mg/m3
Mist
NIOSH REL
ST
10 mg/m3
Mist
NIOSH REL
PEL
5 mg/m3
particulate
CAL PEL
Hazardous components without workplace control parameters
Components
CAS-No.
Engineering measures
:
Provide sufficient mechanical (general and/or local exhaust)
ventilation to maintain exposure below exposure guidelines (if
applicable) or below levels that cause known, suspected or
apparent adverse effects.
Personal protective equipment
Respiratory protection
:
A NIOSH-approved air-purifying respirator with an appropriate