SDS

Page: 4
SAFETY DATA SHEET
Revision Date: 05/23/2015
Print Date: 10/15/2015
SDS Number: R0411612
Synpower™ FULL SYNTHETIC SAE 0W-20 MOTOR
OIL
VV916
Version: 1.0
4 / 12
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Engineering measures
:
General room ventilation should be adequate for normal
conditions of use. However, if unusual operating conditions
exist, provide sufficient mechanical (general and/or local
exhaust) ventilation to maintain exposure below exposure
guidelines (if applicable) or below levels that cause known,
suspected or apparent adverse effects.
Personal protective equipment
Respiratory protection
:
No personal respiratory protective equipment normally
required.
Eye protection
:
Not required under normal conditions of use. Wear splash-
proof safety goggles if material could be misted or splashed
into eyes.
Skin and body protection
:
Wear as appropriate:
Safety shoes
Wear resistant gloves (consult your safety equipment
supplier).
Hygiene measures
:
General industrial hygiene practice.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state
:
liquid
Odour
:
No data available
Odour Threshold
:
No data available
pH
:
No data available
:
No data available
Boiling point/boiling range
:
626 °F / 330 °C
(1,013.333333 hPa)
Calculated Phase Transition Liquid/Gas
Flash point
:
> 390 °F / > 199 °C
Method: Cleveland open cup
Evaporation rate
:
No data available
Flammability (solid, gas)
:
No data available
Upper explosion limit
:
6 %(V)