Instructions / Assembly

INSTALLATION INSTRUCTIONS

The following installation instructions should allow you to install the ValveSentry

device in a short period of time. You will need a few screw drivers of various sizes,

pliers and a wrench to screw the ¼ inch bolts on the U Clamps.

NOTE: The hardware supplied with the ValveSentry

Device is designed to

accommodate most valves and set ups. However, as you can imagine, all valves

are custom installed to fit their environment with some using unusual plumbing

fixtures and some being fit into cramped spaces. Therefore, it is possible that

you may have a unique valve or set up requiring you to obtain supplemental

hardware to complete installation. In addition, the ValveSentry

Device can

only be installed if there is sufficient space surrounding the valve to

accommodate the hardware.

In addition to these instructions, please refer to our installation video that can be

found on our website: www.ValveSentry.com.