Instructions / Assembly

BASIC SAFETY INFORMATION

IMPORTANT! “DANGER,” “WARNING,” and “CAUTION” alert you to important operating instructions or to potentially hazardous situations.

Pay special attention to these items.

• DANGER: The ValveSentry™ device is powerful. It has considerable torque allowing it to open and shut your valve. THEREFORE ALWAYS

KEEP YOUR HANDS AND FINGERS AWAY FROM THE DEVICE while it is powered. If your hand or finger gets caught on a valve or is between

the valve and a pipe, wall or other object while a valve is opening or closing, it could cause injury. That is why you should always unplug and

remove the batteries from the unit prior to installing, adjusting or touching it. Remember that you can always immediately shut down the

unit by pressing the “stop” button on the controller.

• Quick Release Feature: The ValveSentry device has a quick disconnect feature. A cotter pin holds the motor assembly in place and in the

unlikely case of a malfunction of the ValveSentry the pin can be easily pulled out allowing you to quickly remove the motor from the motor

drive shaft by sliding it forward. With the motor removed you can open and shut the valve by hand.

• Low Battery Feature: The ValveSentry makes a chirping noise when the batteries need replacement. To ensure that the device functions

properly replace batteries when chirping occurs.

• WARNING: Before you turn off a water source. Be aware of any consequences that can result from your valve being turned off by the

ValveSentry™ device before installing it. For example, some heating systems can be damaged if water is cut off for any length of time.

CustomControls LLC is not responsible for such damage. Therefore, please deploy the ValveSentry™ device in a thoughtful manner.

• CAUTION: The ValveSentry™ device has limitations. This ValveSentry™ device is not foolproof and is not warranted to protect lives and

property from water damage and associated hazards such as electric shock. The ValveSentry™ device is not a substitute for insurance.

Homeowners and renters should insure their lives and property. In addition, it is possible, although unlikely, for the ValveSentry™ device to

fail at any time. For this reason you must test the ValveSentry™ device every six months to assure it has fresh batteries and is working

properly.

• CAUTION: The ValveSentry™ device is NOT a solution for a “stuck” or frozen valve. The valve that is being protected must be in good

working order for the ValveSentry™ device to be effective. If you cannot turn off your valve using normal hand strength, the

ValveSentry™ device cannot turn off your valve.

• WARNING: The ValveSentry™ device is not intended for industrial, nuclear, aeronautical, medical or other critical applications. Contact

CustomControls to discuss possible solutions for such applications.

• CAUTION: If your water heater or other appliance malfunctions and activates the ValveSentry™ device, turn off any gas or electric power

to the malfunctioning appliance to mitigate the possibility of fire, explosion, electrocution or damage to the appliance

and promptly summons a professional repair person to evaluate the situation.