User`s manual

23
8.7 Turning Power Off, Completely Power Off
To turn off the power, press <POWER> button on the remote or press power key on the
front panel. The LED will turn into slightly dimming status, and this shows the unit is in
“STAND-BY” status.
Press power button on remote control more than 1 second will bring up the following
POWER-OFF DIALOG BOX.
Power Off  Turn off power completely
Reboot  Reboot the system
Suspend  Make it suspend mode
This unit consumes quite little power which is less than 0.4W at STAND-BY mode. This can
be achieved by minimal power consumption logic. This unit supports high speed booting
mode from STAND-BY. It takes less than two seconds to resume to the normal operation
status from STAND-BY mode.
To turn power off completely, please press and hold <POWER> key at the front panel more
than 4 seconds. The LED will be turned off completely.