User`s manual

15
8. Initial Screen
8.1 Turning On Power
Press <POWER> button on the remote or press the power key at front panel to turn on the
power. The unit will start boot-up.
LED will blink fast during the booting. LED will keep fade-in & out during normal operation
after booting.
8.2 Setting TV Output
The TV-OUTPUT selection screen will pop-up and switch various resolutions if TV-OUTPUT is
not configured yet, like chapter6 “Initial Display Setup for TV”. Press <OK> button if screen
is shown.
Still didn’t get the screen, try <TV-OUT> button on the remote until getting the output
screen on TV. If TV-OUT is set correctly, HOME SCREEN will appear like below.
Settings