Instruction manual

❍ 1. In order to assemble the wing you will need the

following items as shown in the photo above.

#1 Right Wing Panel (1)

#2 Left Wing Panel (1)

#3 CA Hinges (8)

#4 Wing Dihedral Braces (2)

#5 Aileron Servo Tray (1)

#6 Aileron Servo Tray Mounting Blocks (2)

#7 Aileron Pushrods (2)

#8 Faslinks (2)

#9 Clevises (2)

#10 Nylon Torque Rod Horns (2)

#11 Silicone Clevis Retainers (2)

❍ 2. In order to assemble the wing you will need the items

shown in the photo above from your radio control

system contents.

JOIN THE WING

❍ 3. Use 6-minute epoxy to glue both 3mm plywood wing

joiners together. Use weights or clamps to hold the joiners

in place until the epoxy cures.

ASSEMBLE THE WING