Felicity Plus
This shows the ideal height of the hot/cold water output taps as well as distance between both taps. 3 Using a wrench, connect the 2 water input hoses behind the shower panel to the hot/cold water output taps. Left hose is for hot and right hose is for cold. 3 ~ 6" 58 1 7 ~ 47 8 4 9 46 8 6 4 Make sure the Positioning & Support Bracket (3) is properly installed into the shower wall.
Preparing the proper position for your shower panel Parts Identiļ cation: 1 Using your Body Height (BH) as a basis for determining the position of your shower panel, take your body height in inches (referred to as "BH"). Use the drawing to measure A and B in order to determine correct drilling points to install the Positioning and Support Brackets (6) A = BH (minus) 47 3/8".
Basic Set-Up: Positioning the panel using user's height (method 1) Below is a visual step-by-step sequence of how to put the shower panel's main components together. Depending on your height, we recommend the shower head to be positioned approx. 10 inches above your head. If you have several persons in your home who will be using this shower panel, measure the height of the tallest person and position the shower head 10 inches over that height.
