User Manual

• Before Installation, insure there is sufficient
clearance to accommodate the shower panel.
A minimum of 22” is required between the
shower outlet and top of your existing valve.
Maximum clearance required 42”.
Ensure that the water line to the overhead
shower pipe is completely shut off prior to
performing any work.
• Connect the Brass Extender Joint (Part 4)
we provided to the showerhead pipe outlet.
Use waterproof plumbing tape on the thread
prior to securing the extender to prevent leaks.
(Note: There are 2 sizes of the brass extender.
Choose the appropriate size).
Se necesita un tubo de un diámetro de
0,5 pulg. para instalar la junta de
extensión de latón (pieza 4) del panel
de ducha.
INSTRUCCIONES DE INSTALACIÓN
MIN 22 Pulg.
• Quite el cabezal de ducha y el mango de ducha
empleado.
- 40 -