User Manual

PVC cover is not
required if the water
outlet is below 33.38"
Valve goes below this
template. Bottom of
panel.
MIN ½ po
4
4
Installation position will
vary depending on
users height. Depending
on users height, it is
recommended to have
10” of clearance above
your head.
Recommended
10 po
A
C
B
Attention:
INSTRUCTIONS D'INSTALLATION
• Le gabarit d'installation fourni
avec le panneau de douche
constitue la meilleure façonde
déterminer la position adéquate
du panneau de douche.
Gabarit d'installation
How to use Template:
• Connect the brass extender joint provided.
• Place the installation template in the desired position over the wall with the brass extender joint positioned
going through the cutout on the template. It is recommended that the tallest user in the house be the determining
factor of the desired position. 10” of clearance above the tallest user is recommended.
• Once the template is in the desired position, secure the template by using tape or a temporary adhesive to hold
it in place.
• The template is the exact size of the shower panel. The bottom of the template should be above your existing
shower valve. Recommended that there is a ½” clearance above the valve.
• If the template does not fit with the clearance provided, you can mount the panel off center and to the side.
- 24 -