User Manual

• Before Installation, insure there is sufficient
clearance to accommodate the shower panel.
A minimum of 22” is required between the
shower outlet and top of your existing valve.
Maximum clearance required 42”.
Ensure that the water line to the overhead
shower pipe is completely shut off prior to
performing any work.
• Connect the Brass Extender Joint (Part 4)
we provided to the showerhead pipe outlet.
Use waterproof plumbing tape on the thread
prior to securing the extender to prevent leaks.
(Note: There are 2 sizes of the brass extender.
Choose the appropriate size).
Un diamètre de ½ po est requis pour
installer le joint d'extension en laiton
(pièce 4) du panneau.
INSTRUCTIONS D'INSTALLATION
• Fermez le robinet ou la source d'eau de la douche
existante. Enlevez la pomme et le tuyau de douche.
- 23 -
MIN 22 po