User manual

Media Device Operation
Note:
-
You should connect your Media Device with this unit first using the cable
supplied.
- After connecting Media Device the current mode will change to Media mode
and the unit will start playing the selected list or play
all files registered on the
Media Device if no selected list.
- The unit will not operate, or may operate improperly with unsupported
versions.
- When the Media Device's internal battery becomes depleted, the Media
Device cannot
be played even if connected to the unit. This unit cannot be
used
to recharge the iPod.
- Playback functions as play, pause, stop, track selection, fast forwardl
reverse, repeat play, intra scan, random play, etc. are the same for Media
Device and
CD/DVD operation, please refer to the CD/DVD player operation
section for the instruction about these functions.
Switching to Media
Device
Media Device
SETUP
1. Press VIDEO in screen at Media Device audio mode to standby for video
signal input from Media Device.
2. You cannot operate the Media Device video playback functions by this unit.
You should operate the video playback functions by your Media Device.
3. If you want to go back to Media Device audio mode, press Audio on screen.
1. Press SETUP in screen to open Media setup menu display.
2. Press ~ ,~ by Auto Connect menu bar to select On/Off. The default is
On. If you select Off, when you connect iPod to this unit, the mode will
not automatically be changed, while you should switch the mode
manually.
36