User manual
Radio Operation
EQ
Press
EO
button to enter the Audio Adjust screen.
EO
has 5 basic different audio effects, which are
User,
Classical, Rock, Jazz and
Pops.
The user
can
adjust the FAD(Fade), BAL(Balance) and LOUD(Loudness) by
pressing
....
,
~.
- If you select User, the Bass and Treble bars are activated. The user can select
from
-7
to
7 levels of Bass and Treble effect.
* DX - Distance wave
LOC/DX
AMS/PS
Press LOC/DX
to
change the sensibility of the unit. When select
LaC,
the sensibility
will decrease
to
20dB.
*
LaC
- Local wave
-Stereo Broadcast (ST)
When ST appears at upside of display, it's stereophonic broadcasting. If not, it's
monophonic broadcasting.
- Using Preset Stations
Ten
numbered preset buttons store and recall stations for each band.
All ten stored stations for the current band appear
on
the
TFT screen.
- Storing Station
1.
Select a band(if needed), then select a station.
2.
Press to hold
1-0
buttons
in
remote control or
1-10
of station listed on rightside
in
display (Press ....
on
the list to choose the number) for 3 seconds to store
each station's frequency
to
the number.
3.
To
listen to a corresponding stored station, press
1-0
buttons
in
remote control
or
1-10
in
display.
- AMS (Automatic Store)
Select a band and hold
on
AMS item for more than 3 seconds
to
activate the Auto Store function, which will search six strong stations
in
the current band and store them automatically
in
the list.
When activating this fuction, the yellow charactor "AS" appears instead
of the time
on
the upper-side of the screen.
-
PS
(Preset Store)
Scan stored stations
in
the current band.
- Select a band (if needed).
- Press
PS
shortly
in
display
to
activate the Preset Store function.
It
will stay 3 seconds at each preset station.
- Press
PS
again
to
stop scanning
in
the current band when a
desired station
is
found.
18