User manual

Radio Operation
Radio
Band
Automatic
Scanning
Manual
Scanning
When you turn on the unit at first, radio mode will displays on screen
automatically.
- If the radio mode is wanted when the user in other mode, press MODE
button (16) in remote control or press the mode icon at up-left side of
screen
to go back to the mode selection display to find radio mode icon.
Press BAND button(1) on the remote control or BAND on screen, the
current band will change among AM band and FM3 bands
in display.
Press SCAN in display to start scanning broadcasting stations in the current
band. And the unit will scan the strongest top 10 ratios to be stored in the
list on the right side
of screen.
There are two ways to do the scanning manually, which is TUNE and
SEEK.
-TUNE
Press TUNE 1\ , TUNE v at downside in display to change the radio
frequency up/down manually by one step
in the current band.
-SEEK
Press SEEK 1\ • SEEKv at downside in display to seek the radio frequency
up/down. When strong signal's radio station
is found. it stops for 3 seconds
each.
Press SEEK
1\ • SEEK v again or ENT button(13) to stop seeking and
listen to the current broadcast.
17