User manual
Main Setup Menu
Enter/Exit
Main
Setup
Menu
General
System
Time
OSD
Language
Beep
TFT
Auto
Open
TS
Calibrate
1.
Press MAIN SETUP
in
the mode selection display.
2.
Press
Iii]
in
left side
of
screen to exit setup mode and return to the last screen.
There
is
three available sUbjects
of
setup
to
select., which are General,
ASP,
Video.
Once enter the MAIN SETUP menu, it will be displayed as General screen.
Press the Syetem Time menu bar on screen to open Clock Adjustment display.
Press
~
,
~
in display to set the hour and minute.
Press 24H/12H in display to select a display time way between 12/24(AM/PM).
Press Reset
in
display to reset the second count
to
Zero.
Press
Iii]
in
display to complete setting time and go back to menu display.
Press the OSD Language menu bar in display and use
A or
.....
to
select a
desirable language.
Press the Beep menu bar
in
display
to
activate the menu selection.
Press
~
or
~
to select On/Off for turning on/off the touch screen beep sound.
Press TFT Auto Open menu bar on screen and select the "Yes" and "No".
If you select "Yes", the TFT will open automatically when turn the set on.
If you select "No", the
TFT
will open automatically when turn the set off.
1.
Press TS(Touch Screen) Calibrate menu bar on screen to open the TS
Calibrate window as below which asks Yes/No for start.
2. Press Yes to start touch screen calibration.
14