User manual

General Operation
Monitor Angle Position
(Left/Right)
To adjust the monitor positon Left/Right:
• Make sure the monitor
is in the "OUT" position.Press IN/OUT
• Grasp both side
of the monitor near the bottom and gently pull
on side until the mechanism is fully extended.
To return the monitor mechanism to the "closed" position
• Grasp both side of the monitor near the bottom and gently push
on the side that
is extended until the mechanism is closed .
• A slight click will heard when the monitor mechanism
is closed.
Refer to the diagram below.
r
I
,
'.
i
Mechanism Closed
Mechanism Fully Extended
Mode
Optional Mode
Selection
Volumn
Mute
Dimmer
Display
Press MODE to select between RADIO, DVD, AVX inputs or other
functions that available. Mode operation are indicated
on the OSD
(On Screen Display) or
on the secondary LCD.
With the monitor open, press the screen
to display the OSD menu bar
and press RADIO,DVD,AV or
AV2 in the OSD menu bar to select the
desired source.
Adjust volume by rolling the volumn button
in the front.
Press MUTE
to silence audio.And the MUTE icon will appear in OSD
Press MUTE button again to cancel the MUTE status.
Press DIM
to adjust the backlight level of TFT LCD.
(1 minimum / 5 maximum).
With the moniter under closed, pressing DISP can display the clock
or the radio rate
in the secondary LCD. The DISP function does not
work when the monitor
is open except in the DVD mode. Press the
DISP When it's in DVD mode, it will show the information of the DVD
and the general operation buttons in display.
12