Specifications

1. Battery + lead (Yellow)

To connect the positive terminal of the car battery.

2. ACC Power Lead (Red)

To ACC power lead powered when engine key position is ACC.

3. Ground Lead (Black)

Connect the lead to a good chassis ground on the car. Make sure the

connection is made to bare metal and is securely fastened .

4. Door wire

This lead is to be connected to the door pin of the vehicle. This allows the

dome light to be switched by opening or closing door.

5. FM Antenna

This antenna send the signal to FM receiver.

6. AUX A/V, Input 1

7. AUX A/V, Input 2

8. AUX A/V, Output

An auxiliary A/V output is provided to drive an external monitor. This signal

mirrors what’s being shown on this player. The volume function does not

affect the Auxiliary A/V Output.

9. Polarity switch

Please slide to “-” at the left position if your vehicle’s door trigger is negative;

Please slide to “+” at the right position if your vehicle’s door trigger is positive.

Notes: Please slide it to a side securely. Do you allow the switch to rest in the

middle of the selections.