Owner's Manual
Table Of Contents
INSTALLATION
Please make sure
of
suitability
of
the configuration and the size. Use the suitable accessories
and tools for installation or disassembling.
~
-~
~
~"\
,.:..-::-,.:..':y> \
\
f \ :
\
~,i
~)2
3
(1) First
of
all, unscrew the four screws
on
the mounting plate connected to the unit and take
off the mounting plate.
(2) Fixup the mounting plate on the suitable position
of
the vehicle with four screws.
(3) Then install the unit with four screws on the mounting plate to fix the unit.
TROUBLESHOOTING
You can solve the simple problem
with
this, please check before asking
for
assistance.
Trouble
Check Point
No power
-Check if the AC power cable
is
connected properly.
Remote control
-Please keep out
of
direct sunlight.
does not work
-Point remote control directly at the remote control sensor.
properly.
-Check or change the battery of remote control.
-If the remote control
is
placed
in
the closed area
of
vehicle or under
the sun, the battery will
be
discharged.
-In case
of
the leaking
of
battery liquid, clean up and change battery.
No picture
-Check if the AC power cable
is
connected properly.
+No sound
-Check the direction
of
picture/sound connecter
of
A / V connection
cable.
Picture without
-Check the volume.
sound
-Check if the mute function
is
on/off.
Sound without
-Check if the
AV
mode
is
selected correctly.
picture
-Check if the brightness and color
of
monitor
is
adjusted properly.
Distorted sound
-Check if the power and voltage
is
provided properly.
-Check ifA / V input is connected correctly.
.&
CAUTION
If moisture or debris get into the device or anything unusual occurs such as smoke, strange
noise, smell, etc., please disconnect AC Power Cable immediately. Unit Breakdown of,
can cause hazard such as fire and electric shock (period) , Please do not disassemble
device with high voltage hazard.