Owner`s manual

21
Install Top Convection Baffl e
Position the fi rebox as far back as possible within the
existing fi replace to allow ample space at front for the
fret and to allow convection air to fl ow under the smoke
curtain of the existing fi replace.
Position the top convection baffl e with the threaded
studs pointing downwards into the slots at the top of the
fi rebox. Slide the convection baffl e as far forward as
possible, angled down if possible, to force the air under
the smoke curtain, and tighten the wing nuts.
Convection Baffle
Wingnuts(2)
Start Wingnuts an Studs.
Slide Convection Baffle
into slots. Adjust
Baffle Forward to Touch
Back of Smode Curtain of
Existing Fireplace.
Tighten Wingnuts.
Installation
QUALIFIED
INSTALLER