Owner`s manual

6
for Solid-Fuel Burning Fireplace Insert Only
See separate framing Dimensions for Zero Clearance applications with the Zero Clearance Kit RA24ZC.
—For Solid-Fuel Burning
Fireplace Insert
(See separate framing dimensions for Zero Clearance applications in
the Zero Clearance Kit RA24ZC.)
The diagram shows minimum dimensions required to install the RF24.
Installations in cavities having a combination of  the minimum
dimensions shown, although possible, may prove to be difcult.

Combustible Mantel and Hearth Clearances for insert applications
must conform to those required for the original solid-fuel burning
replace in which the RF24 insert is being installed.
NOTE: The glass front and hearth are very hot. Existing wire mesh
screens or free standing hearth mounted mesh screens may be used
in front of the RF24 insert to help minimize the chance of injury.
Dimensions and Clearances
17”
Stand-offs
3” dia.
Collar
4-1/2”
4-1/2”
1”
Front Face of
Cast Fret
24”
Control
Valve
Location
Top View
Front View Side View
Gas Inlet
3/8” NPT Female
1-3/4”
24”
Valve
Min. 12”
Max. 14-3/4”
Smoke
Channel
for
Checking
Draft
Fret
Mounting
Brackets
(removeable)
Optional Fan
Speed Control
Location
(at front)
18/3/4”
19”
20-1/2”
Min. 12”
Max. 14-3/4”
4-1/2”
Adjustable
Convection
Baffle
Optional
Cast Fret
Levelling
Bolt
1-1/4”
13-1/4”
14-1/2”
Vent Switch
Location
24-1/2”
8”
25-1/2”
27”
10”
11”
RA24TB Fret (Black)
1225VFB Ventana Fret (Black)
RA24CV Fret (Vintage Iron) RA24AV Fret (Vintage Iron)
Optional Frets
24-3/8”
7-5/8”
20”
Height of Smoke Curtain
14”
28-1/2”
18”
19-1/2”
Minimum Insert Cavity