User manual

Audio Adjustments

NOTE: The Bass and Treble levels are only adjustable when EQ is on “User” mode.

The Loudness function compensates for deficiencies in sound ranges at low levels. Loudness

levels range from 1-4 or “off”. When the Loudness function is on, LOUD is displayed on the

screen.

Exiting the Audio Control Menu

Press and hold the SMART DIAL/VOL button on the front panel to exit the audio control menu, or

touch the return arrow on the top right of the display.

Press the (ESC) or (SEL) button on the remote control to exit the audio control menu.

Six-Channel Audio Control

Master Volume

Front Left Channel Volume

Front Right Channel Volume

Rear Left Channel Volume

Rear Right Channel Volume

Center Channel Volume

Subwoofer Volume

Item

00 to 40

-10 to +10

6-Channel Audio Adjustments

Rear Zone

If a monitor is installed in the rear zone and connected to the rear zone AV output, passengers in

the back seat can control the DVD output using the rear zone remote control. See “Rear-Zone

Remote Control” for instructions.

System Reset

To correct a system halt or other unusual operation, use the tip of a pen to press the RESET

button located on the front bottom-right corner of the unit. After a system reset, the unit restores

the settings before last power off.

Mute

The volume will be muted when the following cases occur:

• Automatic: audio output mutes when a telephone call is received by the car phone or when

verbal navigation is performed.

• When the “MUTE” wire is connected to a cell phone that will output a mute signal to the “MUTE”

Wire.

• Manual: Press the MUTE button ( ) on the front panel or the MUTE button ( ) on the

remote to mute the volume from the unit.

NOTE: Press the MUTE button again to restore the volume.

Adjusting the volume or using any of the audio set-up features will cancel the mute function.