User manual

2. Use the Multi-Zone Remote Control to access the Rear-Zone and select a source to play.
3. Press and hold the SRC button on the front panel to toggle Rear-Zone mode On.
Exit Rear-Zone
1.Touch the Off button on the Rear-Zone menu.
2.Press and hold the SRC button on the front panel.
NOTE: If DVD is selected as the front source and SD Card can not be selected for the rear
source, if SD card is selected as the front source and DVD can not be selected for the rear
source .Since the multimedia processor is shared between optical and SD Card media, one or
the other can be selected but not both simultaneously.
Selecting a Source for the Front Zone
Access the Front-Zone menu, and this menu allows you to select a source for the front zone.
You can also use the button on the front panel or on the front remote control.
The AM/FM tuner/iPod/SAT Radio graphics will change to a "blue screen" background when the
DVD player or SD Card media is selected from the Rear-Zone menu.
Remote, Smart dial, touch screen operations and buttons on front panel are all useable to
control the front source.
The functions of the buttons on the touch-screen are discribed in the next chapters about AM/FM
tuner/iPod/SAT Radio.
NOTE: Optical media and an SD Card cannot be selected from the Rear-Zone Source Menu
simultaneously.
Tuner Operation
1.Current Source information, touch this area to return to MAIN menu
2. Current Radio Band Indicator
3. Current Preset Station playing Indicator
4. Stereo Broadcast Indicator
5. Radio Frequency Indicator
6. Preset Radio Stations: Touch to recall preset stations or touch and hold to store a station.
(total 12 stations a Band can be preset.)
7. System EQ setting
8. Loud Setting Indicator (See “Audio control menu” for instructions. )
9. Rear Zone Playing Mode
10.Volume Indicator.
11.Strong Local Signal Broadcasting Indicator: Touch to active Local/DX function
12.Current time
13.Bluetooth Indicator
14. : Touch to change among the following bands: FM-1, FM-2, FM-3 and AM.
15. : Touch to automatically scan and store stations in current radio band. You also can
press the AS/PS button on the front panel.
16. : Touch to seek down.
17. : Touch to seek up.
18. : Touch to tune down once a step.
19. : Touch to tune up once a step.
20. : Touch to activate/deactivate Scan Mode
Switch to Radio Tuner source
Press the SRC button on the front panel or on the remote control to switch to the Tuner source.
You can also access the tuner mode from the MAIN menu directly.
Tuner TFT Display
1 2
6
7
15
3
4
5
17
16 18
13
14
19 20
12
8
9
10
11
21
20
Standby
1. Touch the button on the touch-screen to access Standby mode.
2. In the standby mode, the unit stands in low-power state with audio output only.
3. In the standby mode, you can return to normal screen mode by performing any unit operation.